Manualshelf

Setup guide

ManualsBrandsSavin ManualsFax Machine9980
12345678910
Refer to the listings below.
400dpi
Physical (with Virtual) Memory Black & White Gray Scale Color
------------------------------------------------------------------------
64MB (128MB) up to A0 up to A3 up to A5
128MB (256MB) up to 2A0 up to A2 up to A4
200dpi
Physical (with Virtual) Memory Black & White Gray Scale Color
------------------------------------------------------------------------
64MB (128MB) up to 2A0 up to A1 up to A3
128MB (256MB) up to 2A0 up to A0 up to A2
* Wide Area Network
Do not use ScanRouter V2 Professional in a WAN environment. Depending
on the type of network, a time-out may occur and proper delivery may
not be made.
* Host name notation
When DNS is implemented, host name can be expressed as either with
domain name (FQDN) or without domain name. It may differ depending on
the OS being installed. If you have trouble with using one of them,
try using the other one.
* The minimum size of image data that can be converted to Text (with OCR)
is 128 pixel x 128 pixel.
-------- Other notes --------
* After I/O device setting
After you set up an I/O device, be sure to refresh a destination list
by pressing the appropriate button on the panel of the device (if
available.) Depending on the type of device, the button that can be
used to refresh the list is still available while the delivery service
of ScanRouter V2 delivery server is suspended, however, any update made
during the service suspention will not be reflected.
* Installing software while the delivery service is in operation
If you use MAPI mail or faxed document delivery using RS232, installing
software while the delivery service is in operation may take long time.
In this case, suspend the delivery service before you install software.
If you are using Office 2000, applying Office 2000 service release may
remedy this situation.
* Undelivered mail
If a mail returns by some reason such as wrong address, the file
attached to the mail will be added to the undelivered tray as a
document. The document name will be NDR_XXX, where XXX indicates date
and time. No information will be set to the document except added date
and number of sections.