Setup guide

After Installation
40
5
Basic Settings
To operate the delivery server, the
“Administrator's password”, “desti-
nation”, and “device” must at least be
set. Turn on the power of the device
in advance. Some devices do not re-
quire settings. For more information,
see the [Management Guide], [Readme],
or Help. To display Help, select [Help]
in the operation dialog box.
A
AA
A
Launch the ScanRouter V2 Ad-
ministration Utility.
A Click [Start], point to [Programs],
and then select [ScanRouter V2
Administration Utility] from the
[ScanRouter V2] folder.
The ScanRouter V2 Administra-
tion Utility launches and a dia-
log box for entering a password
appears.
B Since the password is not set
immediately after installation,
click [OK] without entering
anything.
The [ScanRouter V2 Administration
Utility] dialog box appears.
B
BB
B
Set the administrator password.
Set the administrator password in
the ScanRouter V2 Administration
Utility so that the settings are not
changed by mistake.
A Select [Set Administrator] from
the [Server] menu.
The [Set Administrator] dialog
box appears.
B Enter a new password(using
up to eight alphanumeric char-
acters) in the [Password] and the
[Confirm password] boxes.
Since the lower [Confirm pass-
word] box is used for confirma-
tion, enter the same password
as the upper password.
C Click [OK].
The password has been set.
C
CC
C
Set up a device if necessary.
A Select [Set I/O Device] from the
[Server] menu.
The [Set I/O Device] dialog box
appears.
B Select [Add].
The [Add I/O Device] dialog box
appears.
C Enter the host name or IP ad-
dress of the device to be used
for delivery, and select [OK].
Note
❒ You can select [Browse] to se-
lect the device.
The selected device is displayed
in the [Set I/O Device].
D Select [OK].
D
DD
D
Add a user as a destination.
Documents are delivered and
saved for each destination. When
users are registered and added to
the standard destination list in
ScanRouter V2 Administration
Utility, they can be specified as
document destinations.
Note
❒ If the same document is deliv-
ered to multiple users, you
should create a group.
Limitation
❒ The combined number of users
and groups is limited to 400.