Setup guide

Various settings
6
2
Note
❒ By clicking [Browse], you can select the save location from the tree dis-
play.
❒ You can select [Add as DeskTopBinder V2 document] only when DeskTop-
Binder V2 was already installed in the same computer as for ScanRouter
V2 Link.
E
EE
E
Set the format of saving documents.
Select the format from the pull-down menus for [Black & White:] and [Gray-
scale/Color:].
Reference
For more information about formats, see p.12 “File Formats”.
F
FF
F
Select [OK].
You have finished setting up the in-tray for monitoring.
G
GG
G
If multiple in-trays are monitored, repeat Steps
B
BB
B
to
F
FF
F
to add extra in-trays.
Dial-up-related Device
When the dial-up router is connected in an environment in which ScanRouter V2 is used
Take the following precautions when using dial-up devices. If the network en-
vironment is changed, perform the settings again.
In order to set up the delivery server, make settings for the following:
• ScanRouter V2 Administration Utility
• ScanRouter V2 Link
• DeskTopBinder V2
Settings for network devices are made through [Set I/O Device] in ScanRouter V2
Administration Utility.
Note
❒ Some network devices do not require the setting of I/O devices.
Important
❒ If the delivery server is connected when a connection to the delivery server
via the dial-up router is set, the line may be connected and telephone charges
may be accrued.