Setup guide

Introduction

ScanRouter V2 Link can monitor in-trays in the delivery server (ScanRouter V2

Professional/ScanRouter V2 Lite) in the network and notify of documents re-

ceived from a network device in a client computer. Also, ScanRouter V2 Link

can automatically receive the received documents sent by the client computer

and delete them from the delivery server. You can set to save automatically re-

ceived documents as below.

• The documents are saved in a specified location. The documents can be dis-

played by launching a specified application.

• If ScanRouter V2 Link and DeskTopBinder V2 are installed in the same ma-

chine, the documents are added in the [My Work Folder] of DeskTopBinder V2.

The documents can be displayed by DeskTopBinder V2.

1. Delivery server

2. Client computer

3. Received in in-tray

4. Monitoring

5. Auto-Receiving/Notification

Note

❒ In the WAN environment, do not use ScanRouter V2 Link installed in a client

computer. Depending on the network, timeout may occur and documents

cannot be delivered normally during connection.

❒ Set up an environment correctly when the ScanRouter V2 Administration

Utility, DeskTopBinder V2, or ScanRouter V2 Link is used in the dial-up con-

nection computer. ⇒ p.6 “Dial-up-related Device”

FAX

SCN

FAX

SCN

GGFMICOJ