Setup guide

Cooperation with Existing Products
55
4
Cooperation with Existing Products
When this software is used with the
ScanRouter System products of the
previous version and with existing
products, the following restrictions
are imposed.
Importing of Destination Data
Destinations and senders exported
from the following products can be
used by importing them with Scan-
Router V2 Professional/Enterprise.
• ScanRouter V2 Lite
• ScanRouter V2 Professional (Ver.
1xx)
• ScanRouter
• ScanRouter Professional
The imported destinations and send-
ers are added to the main destination
list.
This information is also added to
"Standard Destination List" or "Stan-
dard Sender List" of the destination
list, depending on the type of infor-
mation.
Import the information using the fol-
lowing procedure.
A
AA
A
Click [Restore All Destination Data] in
the [Operations] menu in [Main Des-
tination List] of the delivery table.
B
BB
B
Set the file type to "CSV File Pre-
vious Version (*.CSV)" and select
a file to be imported.
C
CC
C
Click [Open].
Note
❒ If another destination with the
same name already exists, the
file is not imported.
❒ If another destination specified
by the same fax delivering ID al-
ready exists, it is extracted with-
out the fax delivering ID being
specified.
Use from DeskTopBinder V2
To connect from DeskTopBinder V2
(Ver. 1.xx) to ScanRouter V2 Profes-
sional/Enterprise, note the following
items.
❖
❖❖
❖ Destination editing
Destinations cannot be edited from
DeskTopBinder V2 (Ver. 1.xx). Up-
grade DeskTopBinder V2 (Ver.
1.xx).
❖
❖❖
❖ Document delivery
When documents are delivered
from DeskTopBinder V2 (Ver.
1.xx), the destinations that can be
used are added to "Standard Desti-
nation List".