Setup guide

Using ScanRouter V2 Administration Utility
38
3
Destination Search
When the destinations are listed or
displayed, if the items and conditions
subject to the destination display se-
lection above are specified, only the
pertinent destinations can be dis-
played.
Administering TSI Codes
For the delivery of documents re-
ceived by fax using a TSI, the TSIs can
be administered under TSI. Select [TSI
Code] under [Delivery Table] to list all
TSIs registered.
The following actions can be taken
with TSIs:
• Adding new TSI codes
• Editing TSI codes
• Deleting TSI codes
• Exporting/importing TSI codes
Note
❒ The [TSI Code List] displays the fol-
lowing information:
• TSI Code
• Sender Name
• Short ID
• Destination
Adding new TSI codes
The following methods are available
for registering a new TSI:
• Have a fax sent from a facsimile at
the sending point. Once a docu-
ment received by fax is sent to the
delivery server, the TSI informa-
tion from the facsimile will be reg-
istered to the TSI table of the
delivery system automatically.
• Register a TSI with [Add New TSI
Code] from the [Operations] menu.
The following settings must be
made:
• TSI Code
• Sender Name
• Short ID
• Destination
Note
❒ The TSI table makes a facsimile TSI
relate to forwarding destinations.
❒ A sender name can be composed of
up to 80 characters.
❒ With auto TSI registration, desti-
nation information will not be
specified. From the [Operations]
menu, select [Edit TSI Code] to add
the information.
Editing TSI codes
To edit TSI information, select a TSI to
be edited in the [TSI Code List], and
then select [Edit TSI Code] from the [Op-
erations] menu.
Deleting TSI codes
To delete a TSI, select a TSI to be de-
leted in the [TSI Code List], and then se-
lect [Delete TSI Code] from the
[Operations] menu.
Note
❒ Even if a TSI is deleted, the TSI will
be registered again when a fax is
sent to the delivery server from the
facsimile having the TSI.