Setup guide

Using ScanRouter V2 Administration Utility
36
3
Destination List
Add destinations to one or more des-
tination lists. These destination lists
include [Standard Destination List] and
[Standard Sender List]. For ScanRouter
Enterprise, addition or deletion of
destination lists is possible. If a desti-
nation is added to the destination list,
it can be displayed as [Destination] or
[Sender] for the network devices.
If [Destination List] in [Delivery Table] is
selected, [Destination List] is displayed.
If a destination list is selected, the
added destinations are displayed in
[(Destination List Name)].
For ScanRouter Enterprise, the fol-
lowing actions are available:
• Adding new destination lists
• Editing destination lists
• Deleting destination lists
The following actions are available:
• Adding new destinations
• Editing destinations
• Changing short IDs
• Removing destinations from the
destination list
• Changing the display order
• Document addition settings for
multiple destinations (only with
ScanRouter Enterprise)
Note
❒ The following information is dis-
played on the [Destination List]:
• Name
• Number of Destinations
❒ The following information is dis-
played on the [Standard Destination
List-Destination List] or [Standard
Sender List-Destination List]:
• Name
• Short ID
• Name 1
• Comment
• Delivery Type
• Default Mail Type
• Default Mail Address
Adding a new destination list (only with
ScanRouter Enterprise)
Destination lists can be added. Select
[Add New Destination List] from the [Op-
erations] menu and specify a destina-
tion list name and format. Select the
format from [Expanded] or [Backward
Compatible].
Note
❒ [Expanded] can add up to the num-
ber of destinations added in [Main
Destination List] with short IDs of
five digits. [Backward Compatible]
can add a maximum of 200 desti-
nations with short IDs of three dig-
its (001 to 200).
❒ The destination list format that can
be used differs with the network
devices.