Technical data

PRINTER CONTROLLER RW-470
RW-470 7
Printer Controller RW-470
The RW-470 Software works only, if you have installed an con-
troller. You have to install the Printer Controller RW-470 and the
appropriate software. In the next chart the technical data are
listed. In the following chapter the installation of the kernel
driver is explained.
Technical Data
Item Specification
PCI style PCI Version 2.0, Busmaster
Bus-Width 32 Bit
max. PCI bus clock 33 MHz
physical dimension 190 mm x 128 mm
PCB dimension 174,63 mm x 106,8 mm
power supply 3.3 Volts
max power consumption type. 7.5 W, max. 15 W
max memory on board 96 MB
Connection to copier Ricoh IF-cable
max. cable length 5 m
fault tolerance by software shutdown
onboard processor logic cell Spartan LCA
copier interface according Ricoh APIP
PC resources 1 x IRQ, I/O range, 2 x
memory window 32 MB
scanning binary data
plotting binary data
max pix per line 21600 pixels
scan and plot resolution 600 dpi
max scan length 6000 mm
max plot length 6000 mm
plotting speed 90 mm/sec
OS Win 2000 Professional
rasterization process 3 step pipeline mode yield
full engine speed
EMI fcc 47 part 15