Technical data

PRODUCING CFG FILES
RW-470 39
SMITH
ORIGINALFILE ... C:\DEMO\
LAND.PLT
CALCOMP
PEN01
Pen width of the pen
01 in 1/1000 mm
250 The resulting value
must not exceed 32
pixels
CALCOMP
PEN02..PEN16
0..32Pixel 250 as above
STEPSPERCM 1..9999 800 Steps per cm
CCCHECK ON
OFF
OFF Check sum in Cal-
comp file
CCSYNC01 <Characters> 2 Calcomp: ASCII-
Code of the first
sync character
CCSYNC02 <Characters> 0 as above for second
sync character
CCENDCHAR <Characters> 3 Calcomp: ASCII-
Code for end
character
HPGL / HPGL2
PEN000
0..9.99 mm,
<COLOR>
0.36,WHITE
Pen thicknesses in
mm for HPGL pens
Tip: HPGL pen
numbers have three
digits.
HPGL / HPGL2
PEN001
0..9.99 mm,
<COLOR>
0.36,GRAY,
50
HPGL / HPGL2
PEN002..PEN255
0..9.99 mm,
<COLOR>
0.36,BLACK as above
RED BLACK
WHITE
GRAY
GRAY, 50 Red pins are printed
off in certain colors
GREEN dto BLACK as above
YELLOW dto BLACK as above
BLUE dto BLACK as above
MAGENTA dto BLACK as above
CYAN dto BLACK as above
DARKRED dto BLACK as above
DARKGREEN dto BLACK as above
DARKYELLOW dto BLACK as above
DARKBLUE dto BLACK as above
DARKMAGENTA dto BLACK as above
DARKCYAN dto BLACK as above
BORDERACTIVE ON
OFF
OFF Activates border
around the plot
ENTRY VALUES EXAMPLE EXPLANATION
BORDERSAME ON
OFF
ON All borders are the
same as BorderTop