Specifications

CONFIGURATION
RW-470 CLIENTS 83
Configuration
To configure RW-470 PLOTCLIENT HDI/ADI you must carry out
two further configurations. First via the program’s own configu-
ration tool and then in the print dialog of AutoCAD.
Configuration for AutoCAD 13/14 via configura-
tion tool
If you have deactivated during installation the check box for the
start of the configuration tool in step 9, start the configuration
tool now via “Start - programs - RW-470 - RW-470 PLOTCLIENT
HDI ADI - Config“ and enter the following settings:
• Select Program
Select RW-470 PLOTCLIENT WIN, from which you wish to send
your print jobs to RW-470 PLOTBASE for printing. If you use the
[HDI/]ADI Client, your presets always only apply for the current