Specifications

RW-470 PLOTCLIENT LPR
RW-470 CLIENTS 131
RW-470 PLOTCLIENT LPR
With the lpr protocol or command, you can send print jobs to an
RW-470 PLOTBASE via the RW-470 WINPRINT without having to
use an application program. It also only requires a few presets
and one command line. This printing option is especially in-
tended for UNIX users.
Configuration on Server PC with Windows 2000
1. Start your Windows 2000 computer with RW-470 PLOTBASE
as the administrator.
2. Open “Start – Settings – ControlPanel – Add/Remove Pro-
grams – Add/Remove Windows Components” and activate
“Other Network File and Print Services”.
3. Install RW-470 WINPRINT if you have not already done so.
After installing RW-470 WINPRINT, check that the printer driver
has been released, or enabled, and check the spool folder as
follows:
1. Open the printer window via “Start – Settings – Printers”.
2. Use the right-hand mouse key to open the properties for
WINPRINT and change to the “Sharing” tab.
3. Ensure that the printer driver is enabled as WINPRINT.
4. Change to the “Ports“ tab, click on the WINPRINT line and
open the “Spooler Path“ window by clicking on the “Config-
ure Port...“ button.
5. Check that the spool folder is set as “C:\Spool\CFG“.
Note: If you want to see the full file name of your print
jobs in the RW-470 PLOTBASE jobs list, deactivate the
“Use Short File Names“ option.