Specifications

PRINT JOBS AND PRESETS
128 RW-470 CLIENTS
• Input tray
You can select one of the plotter rolls listed. In addition, you can
also select from the “Automatic“ or “Manual“ options. The
“Automatic“ option means that the plotter itself selects a suitable
roll, which matches the prescribed format. The “Manual“ option
means that you feed the print medium into the input tray your-
self.
• Output tray
You have two possible options to choose from for your plots on
the plotter RW-470: Front (output at the front) and rear (output at
the rear). If a folder is connected, the rear output is selected for
the folder. The standard setting is output at the front.
JobOptions
In addition to the “MainOptions“, you have four other general
options that you can use to define the print job parameters:
• Sample print
Activate this option if you want to check the quality of a print.
Only the first set of copies will then be printed. The print off of
further sets of copies is stopped, so that you can check the qual-
ity of the print off. Then you will be asked, whether you would
like to continue with the print out or abort.
• Priority
This shows what priority the job has been given by the user:
Waiting, Low, Normal, High. You can change the priority given
here or set it to the highest level.
• Locked Print
If you have important print jobs, which others should not be able
to see, activate the “Security“ option. Your job can then not be
viewed in RW-470 PLOTBASE by any other person. In the RW-
470 PLOTBASE it only has the status “Password“. Print jobs se-
cured in this way can only be printed off by you the user, as be-
fore printing, the computer asks for the password, which you
have set here in RW-470 PLOTCLIENT MAC. The job is auto-
matically deleted immediately after it has been printed.