Specifications

PRINT JOBS AND PRESETS
RW-470 CLIENTS 127
Off: The drawing is not mirrored when plotted.
X: The drawing is mirrored horizontally.
Y: The drawing is mirrored vertically.
XY: The drawing is mirrored about both axes simultaneously;
equates to a 180° rotation.
You usually use these settings if the drawing has been scanned
and saved with mirror inversion. This is especially important if a
transparency has been scanned with mirror inversion to increase
the contrast.
• Invert
If you activate this option with “On”, the drawing is inverted, i.e.
black and white colors are swapped or inverted.
• Cut Mode
The options available are “Format“ and “Syncro“. If you select
“Syncro“, the plotter RW-470 cuts the drawing immediately after
the last set of data. This results in optimum paper or medium us-
age, because it produces the least waste.
If, on the other hand, you want the print out to always be cut in a
standard format, no matter how much paper remains unprinted,
activate “Format“, thereby instructing the plotter to always cut the
paper to the next largest format. This can be a disadvantage if
e.g. your drawing is only around 0.5 cm larger than an ISO A5
Page, an ISO A4-Page is printed and so almost 50 % of the
sheet remains unused. The advantage of this option is that some
folders require exact formats and you can meet this requirement
with the “Format“ setting.
MainOptions2
The “MainOptions2“ is also opened via the “General“ drop
down menu. Here you can alter the following settings:
• Media type
Select the type of medium to be used to print the drawing: Paper,
Transparency, Film or Recycled Paper. The selection depends on
the medium you have loaded on the rolls of your plotter RW-
470.