Specifications

PRINT JOBS AND PRESETS
126 RW-470 CLIENTS
Print jobs and presets
After completing the above installations, you can send print jobs
from any software to the plotter RW-470 via RW-470 PLOTBASE.
Whenever you want to send a print job, e.g. from a graphics
program, open the menu item “File – Print”. Enter the print pa-
rameters to be sent with the plot. If you always want to use the
same print parameters you can save them as presets or default
values. Open the “General” drop down menu to reach the three
menu items used to set the print parameters for the RW-470
PLOTCLIENT MAC:
• MainOptions 1
• MainOptions 2
• JobOptions
The following three sections describe how to set the print pa-
rameters.
MainOptions1
Send a print job via the menu item “File – Print“. Open “Main
Options1“ via the drop down menu “General“. There you can
alter the following settings:
• Scale to format
Select the drawing format for the plot. Apart from the “Original“
option, you can choose from the following formats: ISO A/B/C,
ANSI A-E and ARC A-E.
If you select the “Original” format setting, the program fetches
the format size from the original drawing file. This is the preset.
• Rotate
Set whether the drawing is to be rotated or not when plotted.
Rotations about 0°, 90°, 180° and 270° are possible. If you se-
lect the setting “automatically“, RW-470 PLOTBASE automatically
rotates the drawing if this results in less paper wastage.
• Mirror
Enter whether the drawing is to be mirrored or not when plotted.
The individual fields mean the following: