Specifications

PREPARE PRINT JOBS
RW-470 CLIENTS 115
settings in RW-470 PLOTCLIENT WEB. If no pen widths are de-
fined, the program uses your settings.
If you do not activate it, the program always uses your settings.
• Size
Enter the pen widths directly via the keyboard in the box left of
“Size“. Activate the pen required in the list above and enter the
new pen width. The valid size unit is “mm“.
If you want to “remove“ a pen, you can enter the pen width as
“0“or the pen color as “white“.
• Grey (%)
The pen color is selected directly beneath “Size“. Activate the re-
quired pen in the list above and enter the new gray scale value.
If you want to “remove“ a pen, you can enter the pen color as
“white” or the pen width as “0“.
• Change
With “Change“, the pen settings you have just entered are ac-
cepted as the new pen settings. The program saves your settings.
Add local entry, add multiple
A job consists of one or several entries (drawings, documents).
Before you send a print job to RW-470 PLOTBASE, you must first
select one or several entries for the job.
For each entry, which you add to the job, the current print pa-
rameters (“entry defaults“, Page 107) are used. Changes to the
print parameters, which you make on the page “add local entry“
only apply for this entry.
You have several possible options to add job entries. You can
add
• A local file
• A Zip-archive with one or several drawings
• Several local files at once
• A Zip archive with one or several SSL-Jobs
The options are described in the following chapters.