Specifications

PREPARE PRINT JOBS
114 RW-470 CLIENTS
“CALCOMP - ONLINE REFERENCE MANUAL“ in the section
“Data Message Format“.
The standard settings are:
Sync character: 2
→ [setting from 0 to 127 possible]
End character: 0
→ [setting from 0 to 31 possible]
Double Sync: OFF
Test sum: OFF
The following two examples serve as possible comparisons:
• AutoCAD12:
Sync character: 22
End character: 13
Double Sync: ON
Test sum: ON
• FordCAD:
Sync character: 2
End character: 3
Double Sync: OFF
Test sum: ON
• Scale Pens
Activate the check box, if the pen widths are to be scaled with the
drawing. To avoid possible loss of information during the print-
out, you must ensure that you have entered at least one mini-
mum pen width in “Pen settings“ if the drawing is to be reduced
in size and at least one maximum pen width if the drawing is to
be enlarged
• Pen Source from File
If you activate “User“, the program will always use your settings.
If you activate this field, you instruct the plotter to use the pen
width information entered in the SSL file for the entry and not the
settings from the “Pens” tab. If no pen widths are defined, the
program uses your settings.
If you do not activate it, the program always uses your settings.
• Pen Colors from File
If you activate this field, you instruct the plotter to use the pen
color information entered in the SSL file for the entry and not the