Specifications

PREPARE PRINT JOBS
RW-470 CLIENTS 113
Calcomp
• Step size/cm
The standard is 800 steps per centimeter. The RW-470
PLOTCLIENT WEB therefore enters 800 as a default value, which
does not normally have to be altered. Nevertheless, it is some-
times advisable to ask the customer what step number per cen-
timeter they are used to working with to guarantee plot
consistency. Furthermore, it can be necessary to make a change
to reduce the DPI, to release more system memory for large
drawings:
Attention: If you enter a larger value, you will obtain a
s m a l l e r drawing: The entry 1 equates to 0.125 %.
Example: if you enter 801, the drawing is reduced to
99.875 %.
• Synchronization
Synchronization is used to check the completeness of the Cal-
comp files, which have been sent from the application program.
Four pieces of information are used for the synchronization set-
tings:
• Sync-Char
• End-Char
• Double Sync
• Checksum
You can either let RW-470 PLOTCLIENT WEB determine the val-
ues or you can enter the necessary settings yourself. If the pro-
gram is to determine the values, activate “Auto detection“.
We recommend that you do not alter the standard values if you
want to enter the settings yourself. Should you nevertheless want
to make a change or to find out more on the topic, compare the
settings with those in your CAD system or read the following sec-
tion in the “Calcomp Inc.“ manual: