Specifications

PREPARE PRINT JOBS
112 RW-470 CLIENTS
activate the check box, the drawing is printed in exactly the same
way as it was printed on the “HP DesignJet“ plotter. However,
undesirable printing results can result, if the plotter language of
your plotter differs greatly from that of the “HP DesignJet“.
If you deactivate the function, RW-470 PLOTCLIENT WEB looks
for the drawing dimensions itself and thus guarantees that the
whole drawing is plotted
• Pen Source from File
If you activate this field, you instruct the plotter to use the pen
width information entered in the SSL file for the entry and not the
settings from the “Pens” tab. If no pen widths are defined, the
program uses your settings.
If you do not activate it, the program always uses your settings.
• Pen Colors from File
If you activate this field, you instruct the plotter to use the pen
color information entered in the SSL file for the entry and not the
settings in RW-470 PLOTCLIENT WEB. If no pen widths are de-
fined, the program uses your settings.
If you do not activate it, the program always uses your settings.
• Size
Enter the pen widths directly via the keyboard in the box left of
“Size“. Activate the pen required in the list above and enter the
new pen width. The valid size unit is “mm“.
If you want to “remove“ a pen, you can enter the pen width as
“0“or the pen color as “white“.
• Grey (%)
The pen color is selected directly beneath “Size“. Activate the re-
quired pen in the list above and enter the new gray scale value.
If you want to “remove“ a pen, you can enter the pen color as
“white” or the pen width as “0“.
• Change
With “Change“ you fix the pen settings you have just edited. The
program saves your settings.