Specifications

PREPARE PRINT JOBS
110 RW-470 CLIENTS
• Stamp Text
Enter the stamp text. You should not use any of the following
characters: „ “ < > ; : \
• Stamp font size
Choose a font size from the selection list.
• Stamp Macro
You can insert a macro in the stamp text. If for example you
want a date in a stamp, choose the macro with the same name.
If you select a macro, it is inserted at the end of the stamp text. If
you want the macro to be inserted in the middle of the stamp text
you can insert the macro command yourself:
- Enter page number: <N>
- Enter date: <D>
- Enter file name: <F>
- Enter time: <T>
- Enter user: <U>
• Stamp job
The stamp on the drawing can be covering, inverted or trans-
parent. In an inverted stamp the color of the text and the back-
ground are reversed. The original black text is then white and
the rest of the background is black. In a transparent stamp, only
the black text can be seen and there is no background.
• Stamp Position
Select a stamp position on the drawing from the list field.
After you have entered all the settings, you must confirm them by
clicking on the “accept“ button.
You can make subsequent changes for individual entries. Read
chapter “Entry list“, Page 118.
Pen settings (pen settings)
You can determine individual pen assignments for HPGL and
Calcomp-drawings. Open the relevant page by clicking on the
“pen settings” button.
You can save several, user-specific pen settings, by entering a
name in the pen descriptions field. You can call up this name