Specifications

PREPARE PRINT JOBS
RW-470 CLIENTS 109
Y: The drawing is mirrored vertically.
XY: The drawing is mirrored about both axes simultaneously;
equates to a 180° rotation.
You usually use these settings if the drawing has been scanned
and saved with a mirror inversion. This is especially important if
a transparency has been scanned with mirror inversion to in-
crease the contrast
• Rotate
Here you can set whether the drawing is to be rotated or not
during plotting. Rotations of 0°, 90°, 180° and 270° are possible.
When set to “Auto“, RW-470 PLOTCLIENT WEB rotates auto-
matically if this results in less waste paper.
• Cut Mode
The selections available are “Synchro“ and “Format“. If you
choose “Synchro“, the plotter cuts the drawing immediately after
the last data has been printed. This results in optimum paper or
medium use, because it produces the smallest amount of waste
On the other hand, if you want the printout to always be cutted
to a standard format, irrespective of how much space remains
unused, activate “Format“.The plotter then always cuts to the
next largest format. This can be a disadvantage if e.g. a drawing
is only around 0.5 cm larger than a ISO A5 page is printed on a
ISO A4 page and thus almost 50 % of the sheet remains unused.
The advantage is that some folders require exact formats and
you can match them using the “Format“ setting.
• Pens
Set the pen settings for the drawing. These can be the default
settings or individually saved pen settings.
Stamp settings
You can enter the following settings: