Specifications

PREPARE PRINT JOBS
108 RW-470 CLIENTS
If you want to scale the drawing smaller, activate “Percent“. You
can now enter a value between 1.00 and 999.00 for the format
width and height.
X = format width
Y = format height
If you want to retain the size ratio of the drawing, activate the
option “Maintain aspect“.
• Border
If you want a white border around the drawing plot, activate the
“ON“ field and enter the required spacing for all side borders.
You can choose between the size units mm, inches and pixels.
• Copies
You can enter any number of copies between 1 and 999 to be
printed by the job.
• Media Source
You can select one of the plotter rolls offered. In addition, you
can also choose the “automatic“ or “bypass“ options. The
“automatic“ option means that the plotter itself selects a suitable
roll, which corresponds to the given format. The “bypass“ option
means that you feed the print medium in the input tray yourself.
• Media Type
Use this menu to select which type of media the drawing is to be
printed on: Any, Paper, Transparency, Foil or Film. The selection
depends on what roll of medium you have fed in the plotter.
• Position
With the “Media Position“ you set the symbolic position on the
paper, if the image is to be plotted on a larger paper format.
E.g. If you have a ISO A4-drawing, which is printed at its original
size on ISO A1, you can enter where the drawing is position on
the larger sheet for printing.
• Mirror
In this area you can set whether the drawing is to be mirrored or
not during plotting. You can choose from four options
OFF: The drawing is not mirrored during plotting.
X: The drawing is mirrored horizontally.