Specifications

PRESETS FOR PRINT JOBS
RW-470 CLIENTS 87
Presets for print jobs
As soon as you want to send the file to print, the presets for the
print open, in which you enter on which medium and format you
want to print or even, whether the file is to be printed rotated
and mirrored. You can alter the settings for the print job on three
tabs:
• Main menu
• Extended
• Options
“Main menu“ tab
• Formats
In this section of the tab you select the drawing format, in which
the drawing is to be printed. Apart from the “Original“ you will
also find the drawing formats: ISO A/B/C, ANSI A-E and ARC A-
E.
In the format setting “Original“ the program obtains the format
size from the original file of the drawing. This is the presetting.
If you want to scale the drawing use scaling option in AutoCAD.
AutoCAD supports defintion of custom defined paper formats.
• Border
If you want a white margin around the drawing plot, activate the
“ON“ field and enter the required spacing for all side margins.
You can choose between the size units mm, inches and pixels.
• Invert
If you activate this option, the drawing is inverted, i.e. black and
white colors are swapped.
• Copies
You can enter any number of copies between 1 and 999 to be
printed by the job.
• Media type
Use this menu to select which type of media the drawing is to be
printed on: Paper, Transparency, Film. The selection depends on
what roll of medium you have fed in the plotter.