Specifications

CONFIGURATION
86 RW-470 CLIENTS
that you would have the opportunity to prematurely
abort.
• Raster gamma correction: With the gamma correction,
to put it simply, you set the brightness of the print. The
gamma correction can be used in all plotters, which
work with raster data. You can set a value between 1
and 5, whereby 5 means the greatest brightness.
• Choose RW-470 program mode: Here you can choose
whether you always want to print your print jobs from
AutoCAD as individual print jobs or whether you need to
process several drawings in one drawing set together. If
you want to process several drawings simultaneously for
printing, activate “generate set with RW-470
PLOTCLIENT WIN“. If you always only want to send in-
dividual jobs from AutoCAD to print and always want to
use the same plot parameter settings, tell the program
“do not display“ this dialog. If you want to decide before
each print and enter new print parameters, simply let
this dialog be “Display” each time“.
• Plot color merge control: You have two options to
choose. By activating „Colors merge“ all levels of your
drawing will be merged. At parts, where two or more
colors lie on top of each other, colors will be merged. If
activating the option „Colors overwrite each other“
higher levels overwrite completely levels below. Trans-
parent parts do not overwrite any colour.
11. Quit the plotter settings by clicking once on “Finish“.
After you have carried out the configurations, you can either
send you print jobs from AutoCAD directly to RW-470 PLOTBASE
or to the RW-470 PLOTCLIENT WIN. The following chapter ex-
plains the individual settings for the printer parameters.