Specifications

CONFIGURATION
84 RW-470 CLIENTS
print job. If you take RW-470 PLOTCLIENT WIN, you can add
several other print jobs to your current print job and have the
same presets for all.
• Select AutoCAD version
If you work with one of the two AutoCAD versions R13 or R14,
inform RW-470 PLOTCLIENT WIN which Version you use.
• Configuration
If AutoCAD 13 has not been installed with the standard paths,
inform RW-470 PLOTCLIENT WIN the two paths in which the
configuration file “ACADNT.cfg“ and initialization file
“ACAD.ini“ are. For AutoCAD 14 no settings are required.
After you have entered the settings in the configuration tool, you
now only have to set up your new printer driver and enter the fi-
nal presets in the print dialog of AutoCAD. You can then start
printing.
Settings for AutoCAD 13/14 in print dialog
To set up the printer with the print dialog in AutoCAD 13 or 14
proceed as follows:
1. Start your AutoCAD 13/14 program.
2. If not done before, please install a HP-GL/2 printer driver,
e.g. HP DesignJet 650C. If you cannot find this printer driver
in the printer list of your AutoCAD program, you will find it
on your AutoCad installation CD. In the program folder of
RW-470 PLOTCLIENT HDI/ADI you will find a readme file
with a detailed description of how to install a HP-GL/2
printer driver.
3. Open any drawing.
4. Open via „File - Print“ the window „Print/Plot Configura-
tion“.
5. Click on „Device and Default Selection“ and choose the HP-
GL/2 printer from the list, e.g. HP DesignJet 650C. Confirm
with „Ok“.
6. Activate option „Plot To File“ on the tab „Plot Configuration“
in the section „Additional Parameters“. In AutoCAD 14 you
have to activate additionally the option „Autospool“. Con-
firm with „Ok“.