Specifications

INSTALLATION
Installation
The installation of the program is carried out on a workstation,
on which an AutoCAD program is installed. You will find the in-
stallation program in the shared "tools" folder of RW-480
PLOTBASE:
\\[ServerPC]\tools\RW_480_PLOTCLIENT_HDI_ADI
1. For installation, start Windows as user with administrator
rights and open Windows Explorer.
2. If Windows has already been started with administrator
rights, quit all active programs resp. do a data backup.
3. Go via the network to the installation directory
\\[ServerPC]\tools\RW_480_PLOTCLIENT_HDI_ADI.
4. Start the file "Setup.exe".
5. In the "Welcome" dialogue, click on "Next".
6. Click on "I accept ..." if you accept the licence agreements.
Click on "I reject" if you do not accept and want to stop in-
stallation.
7. Read the information about the program and click on
"Next".
8. Choose the setup type that you prefer and click on "Next". If
you have chosen the option "Complete", continue with point
10, otherwise continue with the next point.
9. If you have chosen the setup option "Custom", the next win-
dow will ask you to install the Configuration tool, if you use
AutoCAD 13 or 14. Click on "Next" to start this intermediate
installation.
10. If you want to keep your previous installation settings, click
on "install" now to install RW-480 PLOTCLIENT HDI/ADI.
RW-480 PLOTCLIENT HDI/ADI is installed now.
11. As soon as the installation has finished, click on "Finish".
The next chapter describes installation of the HPGL/2 plotter.
RW-480 CLIENTS 90