Specifications

CONFIGURATION
Note: If you choose the "bypass" option, please note,
that the format has to match with minimum size
182mm x 149mm.
• Output
You have two possibilities for the output of your printouts on
plotter RW-480: front and rear. The standard setting is output at
the front.
• Paper Size
In this section of the tab you select the drawing format, to be
used for printing the drawing. You will find the drawing formats:
ISO A/B/C, ANSI A-E and ARC A-E.
• Media Type
In the lower part of the window select what type of medium is to
be used for the print: Paper, Translucent, Film or Recycled pa-
per. The selection depends on what you have loaded your plot-
ter with.
• Orientation
You can choose between portrait and landscape.
• Quality
In this version there are hardly effects on the print out. We rec-
ommend to use "Production" as standard setting.
• Dithering
This is where you enter the settings that influence the print out
with respect to the gray tones. In a black & white print out the
gray tones are represented by different sized dots and different
sized spacings too, so that the viewer from a distance has the
impression of gray tones. This technique is called "Dithering".
You have several options for the setting. Error diffusion e.g. is
suitable for photos or photo-line prints. However, overall we
recommend that you find the optimum settings for your work us-
ing test plots as it is not possible to give a definitive recommen-
dation.
• Intensity
Set the brightness of the print here.
RW-480 CLIENTS 81