Specifications

COLLATE JOBS
Collate jobs
Your main task with RW-480 PLOTCLIENT WIN is to collate
[Plot-] jobs for RW-480 PLOTBASE. You are free to choose
whether you compile a job with one entry or with several entries.
You can prepare fully new jobs or open existing jobs and add
further entries.
To collate a new job you must proceed as follows:
1. Open a new job, either via the menu item "File – New" or by
clicking once on the relevant button:
2. Assign a name to your new job.
Attention: The extension "*.ssl" must be retained, so
as to guarantee that RW-480 PLOTBASE can recognize
the job.
3. Now you add new entries to the job. Your have three possi-
ble options for adding an entry. Refer to the following section
"Add entries".
4. As soon as you have included all the entries in the job, you
begin to enter the settings, which RW-480 PLOTBASE needs
to be able to print off the job as required. Please refer to the
chapter "Job editor" from Page 34.
5. Finally, send the job to RW-480 PLOTBASE by either select-
ing the menu item "File - Print SSL" or by clicking on the rele-
vant button:
RW-480 CLIENTS 70