Specifications

PEN SETTINGS
HPGL/2 - Misc
• Source:
The following description applies to both pen source and color
source.
If you activate "File", the details for pen thickness or pen color
are taken from the plot file being printed. If no settings have
been adjusted here, the plotter reverts to the standard defaults
on the last card "Plotter Defaults".
If you activate "Custom", the printout uses your settings from the
first two cards "Pen" and "Color".
• Pen Scale:
Activate the check box, if the pen widths are to be scaled with
the drawing. To avoid possible loss of information during the
printout, you must ensure that you have entered at least one
minimum pen width in "Pen settings" if the drawing is to be re-
duced in size and at least one maximum pen width if the draw-
ing is to be enlarged
• Clipping:
The clipping command removes the white edges on the border
of the drawing. Most plotter languages differ from each other in
many ways to a greater or lesser extent – including with respect
RW-480 CLIENTS 57