Specifications

PROGRAM SEQUENCE
From the drawing to the job
The following lists the path of a drawing from its preparation
through to the job list of RW-480 PLOTBASE. The work steps are
presented functionally and not person-related, i.e. that several
functions can be carried out by the same person.
With the help of this section, the following graphic and the first
chapter of the manual, you should be able to grasp the task
and possible applications of RW-480 PLOTBASE and the envi-
ronment:
1. PRODUCTION:
The [technical] draftsman/draftswoman produces the draw-
ing using an EDM, CAD or similar system and saves it in one
of the following formats, which are identified by RW-480
PLOTBASE from the file extension:
• Calcomp [*.906, *.907]
• CALS MIL-STD 1840B,28002A [*.cal]
• DWF [*.dwf]
• DWG [*.dwg]
• DXF [*.dxf]
• HPGL/2, HP-RTL [*.plt, *rtl]
• Intergraph [*.cit, *.tg4]
• PCX [*.pcx]
• RLC [*.rlc]
• T6X [*.t6x]
• TIFF G4 [*.tif]
• Windows Metafile [*.wmf]
• Windows OS/2 Bitmap [*.bmp]
As an option, the file formats CGM [*.cgm] as well as PDF
and postscript, i.e. RW-480 Postscript Level 3 Compatible
Option are also available [*.pdf, *.ps]. The file format
DWF/DWG/DXF can only be if you have installed either a
full version from AutoCAD series 2000 to 2006 or the
DWF/DWG/DXF option.
Note: RW-480 PLOTBASE cannot print DWG and DXF
RW-480 CLIENTS 20