Specifications

RW-480 PLOTCLIENT FTP
9. If you want to print several files at once, enter the following
command:
mput <filename> <filename> ...
= mput graphics.tif city.plt
10. If a file comes from another folder than the current folder,
enter the path as well as the file name, as shown in the fol-
lowing:
mput <filename> <path>\<filename>
= mput graphics.tif tmp\city.plt
If you send a file without print parameters to RW-480
PLOTBASE, the RW-480 PLOTBASE basic settings are used. If
you want to send your own print parameters with the plot, you
have to first send the CFG file, which must have the same name
as the graphic file, and then send the graphic file itself!
Attention: Always send the CFG or SSL file with your
print parameters first, then send the graphic file. Oth-
erwise there is a risk that RW-480 PLOTBASE begins to
print your file before it has received your own print pa-
rameters for the print (CFG or SSL file):
mput graphics.cfg graphics.tif
Configuration on UNIX
1. Install the "General Network Services" – TCP/IP.
2. Then install the "BSD Print Spooling System". For SuSE>=
V6.4 "LPROLD from Network Support"; TCP/IP, UUCP,
Mail, News.
Print jobs on UNIX using ftp
If you have entered all the settings described above, you can
RW-480 CLIENTS 147