Specifications

PREPARE PRINT JOBS
Entry list
The list of the current entries appears frequently, after you have
executed the commands "accept", "cancel", and "continue". You
can also open the entry list at any time by clicking on the button
with the name "RW-480 PLOTCLIENT WEB".
For new jobs without entries, a corresponding information text
appears instead. The other functions of this window are de-
scribed in the following chapter.
Edit and delete entries (select, delete)
Until you send off the whole job, it is always possible to change
the settings of the individual job items again. You can no longer
change the entries file (the local drawing file), as there is al-
ready a copy on the RW-480 PLOTCLIENT WEB Server. To
change the print parameters for an entry proceed as follows:
1. Open the entry list, as described in the previous chapter.
2. Select an entry from the list.
3. Choose the function "select".
4. You can now change all the print parameters for the print
out, as described in the chapter "Print parameters for entries
(entry defaults)", Page 120.
To delete an entry, mark it in the list and the click on the "delete"
button. If you want to delete all the entries in the list, click on
"Delete all ".
Send job (Submit job)
If you have collated all the entries for the job and have set all
the print parameters, you can send the job to RW-480
PLOTBASE, so that it is printed.
Open the job list by and click on the button "submit job".
Attention: After submitting a job, you can no longer
edit the individual entries.
RW-480 CLIENTS 132