Specifications

PREPARE PRINT JOBS
width information entered in the SSL file for the entry and not
the settings from the "Pens" tab. If no pen widths are defined,
the program uses your settings.
If you do not activate it, the program always uses your settings.
• Pen Colors from File
If you activate this field, you instruct the plotter to use the pen
color information entered in the SSL file for the entry and not the
settings in RW-480 PLOTCLIENT WEB. If no pen widths are de-
fined, the program uses your settings.
If you do not activate it, the program always uses your settings.
• Size
Enter the pen widths directly via the keyboard in the box left of
"Size". Activate the pen required in the list above and enter the
new pen width. The valid size unit is "mm".
If you want to "remove" a pen, you can enter the pen width as
"0"or the pen color as "white".
• Gray (%)
The pen color is selected directly beneath "Size". Activate the re-
quired pen in the list above and enter the new gray scale value.
If you want to "remove" a pen, you can enter the pen color as
"white" or the pen width as "0".
• Change
With "Change", the pen settings you have just entered are ac-
cepted as the new pen settings. The program saves your set-
tings.
Add local entry, add multiple
A job consists of one or several entries (drawings, documents).
Before you send a print job to RW-480 PLOTBASE, you must first
select one or several entries for the job.
For each entry, which you add to the job, the current print pa-
rameters are used - see "entry defaults", page 120. Changes to
the print parameters, which you make on the page "add local
entry" only apply for this entry.
You have several possible options to add job entries. You can
add
RW-480 CLIENTS 128