Specifications

PREPARE PRINT JOBS
"0"or the pen color as "white".
• Gray (%)
The pen color is selected directly beneath "Size". Activate the re-
quired pen in the list above and enter the new gray scale value.
If you want to "remove" a pen, you can enter the pen color as
"white" or the pen width as "0".
• Change
With "Change" you fix the pen settings you have just edited. The
program saves your settings.
Calcomp
• Step size/cm
The standard is 800 steps per centimeter. The RW-480
PLOTCLIENT WEB therefore enters 800 as a default value,
which does not normally have to be altered. Nevertheless, it is
sometimes advisable to ask the customer what step number per
centimeter they are used to working with to guarantee plot con-
sistency. Furthermore, it can be necessary to make a change to
reduce the DPI, to release more system memory for large draw-
ings:
Attention: If you enter a larger value, you will obtain
a s m a l l e r drawing: The entry 1 equates to 0.125 %.
Example: if you enter 801, the drawing is reduced to
99.875 %.
• Synchronization
Synchronization is used to check the completeness of the Cal-
comp files, which have been sent from the application program.
Four pieces of information are used for the synchronization set-
tings:
• Sync-Char
• End-Char
• Double Sync
• Checksum
RW-480 CLIENTS 126