Specifications

PRESETS FOR PRINT JOBS
ceiver of the invoice in-house.
• Locked Print
By confirming the "Enter password" button, a dialog is displayed
in which the user is requested to enter a password. After this, the
print out can only be started at the server RW-480 PLOTBASE, if
the correct password has been entered. For the password, more
than 32 characters can be accepted, however, it is recom-
mended to use 4 to 32 characters!
• Priority
Set the priority of the print job. If several print jobs are in the
queue, the job with the highest priority is plotted first.
• Delete file after print
Activate this option, if the job is to be deleted immediately fol-
lowing successful print out.
• Sample Print
Activate this option, if you want to check the quality of a print
off. Only the first set of copies will then be printed. The print off
of further sets of copies is stopped, so that you can check the
quality of the print off. Then you will be asked, whether you
would like to continue with the print out or abort.
• Stamp
Here you can adjust whether a stamp should be printed or not.
• Stamp text
Enter the brief text to be printed on the drawing as a stamp.
• Size
Set the font size for the stamp text. You can set the value be-
tween 10 pt to 48 pt.
• Rotate
If you wish the stamp to be rotated on printing, enter the angle
of rotation.
• Position
With this option you can fix the position of the stamp text on the
drawing. You can choose between nine positions.
RW-480 CLIENTS 101