Operator`s manual

Faxing
14
3
❒
Please set your document
straight in the feeder. If you set
more than 15 sheets, make sure
the ends of your document are
not skewed.
D The display will look like this:
TRANSMIT OPTIONi
DIAL FAX NUMBER
E If the memory indicator is not lit,
press the
{
Memory
}
key.
F Dial the number in one of the fol-
lowing ways.
TRANSMIT Y/START
5551234kkkkkkkkkkkkk
*1
In this example Group Dial is pro-
grammed in Quick Dial 08.
*2
In this example Quick Dial key 30
is programmed as the Group key,
and Group dial number 1 is pro-
grammed.
Note
❒
If you install the handset or an
external telephone, you can
send the message manually.
Pick up the handset and dial.
❒
If you want to erase a digit of
the phone number, press the
{
Clear
}
key. If you want to erase
the entire number, press the
{
No
}
key.
❒
The maximum destinations you
can dial using the ten key pad is
49. However, this limitation is
also subject to memory capaci-
ty.
Reference
Programming Quick Dial: see
P.27
“Storing & Editing Fax
Numbers (Functions 31 & 32)”
.
Programming Speed Dial: see
P.27
“Storing & Editing Fax
Numbers (Functions 31 & 32)”
.
Programming Group Dial: see
P.30
“Storing & Editing A Group
Of Fax Numbers (Function 33)”
.
Programming Group key: see
P.32
“Programming The Group
Key”
.
Ten Key Pad Quick Dial
Speed Dial Group
Example:
Method
*1
Quick
Dial key 08.
Method
*2
Quick
Dial key 30 and 1
on the ten key pad.
1 2 3
4 5 6
7 9
*
GFDIAL0N
07
06
GFDIAL1N
Speed Dial
1
0
Example: Speed Dial 10
GFDIAL2N