Operator`s manual

Connecting The Power And Switching On
139
8
Connecting The Power And Switching On
Do not switch on until everything is connected properly.
A Insert the power cable into the socket located at the rear of the machine.
B Plug in the cable to the mains.
C Turn the power switch on.
Important
❒
The supply from the wall outlet must not fluctuate more than 20V either
side of 115 Vac.
❒
The power cord should not be laid in a place where it might trip somebody.
❒
Do not lay anything on the power cord.
❒
If you have to use an extension cord, make sure that it is capable of carry-
ing 115V/15A, and that your facsimile terminal is the only piece of equip-
ment connected that cord.
TSTP090N