Service manual

PAPER DELIVERY 28 March 2006

3-56

3.10.2 DELIVERY BELT / PAPER EXIT SENSOR / VACUUM FAN

MOTOR / PAPER DELIVERY UNIT BUSHINGS

• Remove the paper delivery unit (☛ 3.10.1)

[A]: Vacuum fan motor bracket ( x 4)

[B]: Vacuum fan motor ( x 2)

[C]: Paper exit sensor ( x 1)

[D]: Delivery belts ( x 1)

[E]: Paper delivery unit bushings

NOTE: 1) Make sure that you install the vacuum fan [B] the correct way around.

2) Install the delivery belt [D] the correct way around. The writing must be

on the outside surface of the belt.

3) The flat part of the “D” shaped cutout in the shaft [F] must face upwards.

C267R049.WMF

C267R050.WMF

[A]

[B]

[C]

[D]

[F]

[D]

[E]