Service manual

28 March 2006 SCANNER
3-11
Replacement
Adjustment
3.4.7 ADJUSTING THE SCANNER POSITION
CAUTION
Grasp the front and rear ends (not the middle) of the first scanner when
you manually move it. The first scanner may be damaged if you press,
push, or pull the middle part of the scanner.
Overview
Adjust the scanner positions at these times:
• When the first scanner [C] and second scanner [B] are not parallel with the side
frames [A]
• When you have replaced one or more of the scanner belts.
To adjust the scanner positions, do either of the following:
• To adjust the belt contact points on the first scanner (☛ Adjusting the Belt
Contact Points for the First Scanner)
• To adjust the belt contact points on the scanner bracket (☛ Adjusting the Belt
Contact Points for the Second Scanner)
C267R903.WMF
C267R087.WMF
[A]
[B]
[C]
[D]
[E]
[F]
[G]
[D]
[E]
[F]
[G]