Service manual

28 March 2006 INSTALLATION PROCEDURE

1-21

Installation

10. Open the tape dispenser cover [H]. Then, insert the leading edge of the tape

into the tape entrance until it stops as shown in the illustration [I].

NOTE: Be sure that the tape is installed in the proper direction. If it is not, the tape

dispenser will not work correctly.

11. Firmly insert the power plug in the outlet.

12. Turn on the main switch of the main body.

13. Turn on the tape dispenser switch [J].

C238I519.PCX

C238I520.PC

[H]

[I]

[J]