Service manual

28 March 2006 INSTALLATION PROCEDURE
1-17
Installation
6. Mount the DF by aligning the holes [G] in the DF with the stepped screws, then
slide the DF to the front as shown.
7. Secure the DF unit with two screws [H].
8. Connect the cables [I] to the main body.
9. Attach the scale decal [J] as shown.
10. Connect the power cord, then turn the main switch on.
C267I203.WMF
C267I910.WMF
[G]
[H]
[I]
[G]
[H]
[J]