Service manual

INSTALLATION PROCEDURE 28 March 2006
1-12
20. Raise the paper delivery table slightly, then gently lower it.
21. Lift the side plates and the end plate, and attach the side plate guides [J] for
both side plates.
NOTE: When printing on A4 SEF, 81/2" SEF, B5 JIS LEF and SEF size paper and
thin paper, you should attach the side plate guides to the side plates of the
paper delivery tray. Users can also attach these guides.
22. Adjust the side and end fences of the paper delivery table to match the paper
size.
23. Firmly insert the power plug in the outlet.
24. Turn on the main switch.
25. Make a master and make 30 prints with this master. Do this at least three times,
until the image quality is acceptable.
NOTE: This is a new drum. Because of this, before the first print is made, ink is
supplied automatically. This takes 2 minutes.
C267I105.WMF
[J]
[J]