Service manual

DRUM March 2006
6-28
Automatic Ink Supply for a New Drum
If the machine detects a new drum, ink is supplied automatically at the trial print for
the first job with this drum.
The machine detects a new drum if:
• There is no master wrapped on the drum, and
• The ink detection pins detect no ink
Mechanism:
1. The machine detects a new drum
↓
2. Ink is supplied automatically.
↓
3. If the machine detects the ink before 26 seconds, go to step 5.
If the machine does not detect the ink before 26 seconds, go to step 4.
↓
4. A blank master is wrapped around the drum, and the drum rotates, with pressure
applied to the drum. Then the blank master is removed. Go to step 5.
↓
5. Master making is started for the original that you set.
NOTE: There is also a manual ink supply procedure, like for previous machines.
“0” + “Economy Mode”