Service manual

28 March 2006 USER TOOL LISTS
5-25
Service
Tables
5. Mode Settings
No. Mode Description
1 Auto Cycle You can select to have Auto Cycle mode as either “On”
or “Off” when the power is turned on.
2 Background Correction When you make prints in Photo, or Text/Photo mode, the
background of the prints might appear dirty. In this case,
you can select background correction to improve the
clarity of your prints.
3 Longer Paper If you are making prints on paper of custom sizes, you
can set “Use”.
4 Combine/Repeat Priority You can choose to have either Combine or Repeat
selected by default when the power is turned on.
5 Cmb / Img Repeat Sep.
Line
You can specify the type of separate line of combine and
repeat.
6 Cancel Combine setting You can specify whether Combine/Repeat mode will be
automatically cleared after you have finished your print
job.
7 Skip Feed You can specify the number of times that the drum
rotates when in Skip Feed mode.
8 Memory Mode Setting You can choose to have either Memory mode or Stack
Memory mode as the default.
9 Auto Class Under the Class mode, the machine stops after it is
finished a Class print job. When you select Auto Class,
the machine stops for 2 seconds and then goes on to the
next Class print job.
6. Administrator Tools
User Codes
If user codes are turned on, operators must enter their user codes before they
can operate the machine. The machine keeps count of the number of masters
and prints made under each user code.
No. Mode Description
1 Display Counter(s) You can check the number of masters and copies made
under each user code.
2 Clear Counter(s) You can clear each or all user code counters.
3 User Code Management You can select whether or not to use User Code mode.
4 Key Counter Adjust Normally, the optional key counter counts the number of
prints regardless of the number of masters used. You
can, however, add to the key counter a value between 0
and 50 to the key counter each time a new master is
used.
7. Online Settings
No. Mode Description
1 Hold Data-in You can select to have Hold Data-in mode either “On” or
“Off” when the power is turned on, or after mode settings
have been cleared.