Service manual

USER TOOL LISTS 28 March 2006
5-24
3. Set Operation Mode
No. Mode Description
1 Minimum Print Quantity You can set a minimum print quantity between 0 and
9999. Any number below the minimum will not be printed.
2 Maximum Print
Quantity
You can set a maximum print quantity between 0 and
9999.
3 Panel Beeper You can turn the beeper on or off.
4 LCD Contrast You can adjust the brightness of the panel display.
5 Class Display Under the Memory/Class function, you can select to have
“Select Class/Year” displayed as “Select Department”
instead, when the machine is not limited to school or
college use.
4. Initial Settings
No. Mode Description
1 Master Making Density You can specify the image density that is selected by
default when the power is turned on.
2 Original Type You can specify the original type that is selected by
default when the power is turned on.
3 Ratio You can specify the reproduction ratio that is selected by
default when the power is turned on.
4 Economy Mode You can select to have Economy mode as either “On” or
“Off” when the power is turned on, or after mode settings
have been cleared.
5 Erase Border Width You can specify the edge erase margin.
6 Program/ Change Class You can store settings of the Class mode
7 Program/ Change
Memory
You can store settings of the Memory mode”
8 Prog.Change:
Class/Year
You can store settings of the Select Class/Year.