Service manual

COLOR DRUM 28 March 2006
3-66
3.14 COLOR DRUM
3.14.1 INK PUMP ADJUSTMENT
Purpose: To ensure the smooth operation of the ink pump plunger by properly
positioning its holder.
• Remove the drum
• Cloth screen (☛ 3.9.2)
• Clamper / Metal screen (☛ 3.9.3)
1. Remove the E-ring [A] to free the plunger from the pump drive slider [B].
2. Loose the two screws securing the holder [C]. (Do not remove the holder.)
3. Push the plunger [D] until it reaches the bottom.
NOTE:
The end of the plunger [D] should not project outside from the holder [C].
C267R915.WMF
[A]
[B]
[C]
[D]