Service manual

28 March 2006 MAIN DRIVE
3-63
Replacement
Adjustment
3.11.2 MAIN DRIVE TIMING BELT ADJUSTMENT
After the timing belt is replaced, correct belt tension must be applied.
• Rear cover (☛ 3.2.3)
• MPU (☛ 3.3.1)
1. Loosen the screws [A], [B], and [C].
2. Move the tension roller [D] to the right with a screwdriver [E] as shown.
3. Tighten the screws [A], [B], and [C].
4. Remove the screwdriver.
C267R053.WMF
[A]
[B]
[C]
[D]
[E]