3150eDNP OPERATING INSTRUCTIONS TSLH02HE Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual.
Introduction This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatility from this machine all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. Please read the Safety Information before using this machine. It contains important information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
Note to users in the United States of America Notice: This equipment has been tested and found to comply with the limits for a Class A digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Safety Information When using your machine, the following safety precautions should be always be followed. Safety During Operation In this manual, the following important symbols are used: R WARNING: Ignoring this warning could cause serious injury or even death. R CAUTION: Ignoring this caution could cause injury or damage to property. Examples Of Indications Symbols R mean a situation that requires you take care. Do NOT carry out the operation represented by this symbol m.
R WARNING: • Only connect the machine to the power source described on the inside front cover of this manual. • Avoid multi-wiring. • Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it, pull it hard or bend it more than necessary. These actions could cause an electric shock or fire. • Do not plug or unplug the power cord with your hands wet. Otherwise, an electric shock might occur.
R CAUTION: • Keep the machine away from humidity and dust. A fire or an electric shock might occur. • Do not place the machine on an unstable or tilted surface. If it topples over, it could cause injury. • After you move the machine, fix it with the caster fixture. Otherwise, the machine might move or come down to cause a personal injury. • When you move the machine, unplug the power cord from the wall outlet to avoid fire or electric shock.
• Keep the ink or ink container out of reach of children. • If ink is ingested, force vomiting by drinking a strong saline solution and consult a doctor immediately. • Be careful not to cut yourself on any sharp edges when you reach inside the machine to remove misfed sheets of paper or masters. • Do not touch the belt at the end of the paper delivery table. Do not insert your hands under the paper feed table or the paper delivery table. You might be injured.
How To Read This Manual Symbols In this manual, the following symbols are used: R WARNING: This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are described in the Safety Information section.
What You Can Do With This Machine ❖ Standard Printing See ⇒ P.5 “Standard Printing”. ❖ Adjusting The Print Image Position See ⇒ P.8 “Adjusting The Print Image Position”. ❖ Adjusting The Print Image Density See ⇒ P.10 “Adjusting The Print Image Density”. ❖ Making Half-tone Prints See ⇒ P.11 “Tint Mode—Making Half-tone Prints”. ❖ Making Clear Prints See ⇒ P.12 “Fine Mode—Making Clear Prints”. ❖ Changing The Print Speed See ⇒ P.13 “Changing The Printing Speed”.
❖ Erasing Edge Margins See ⇒ P.19 “Edge Erase—Erasing Edge Margins”. ❖ Erasing The Shadow Of Pasted Originals See ⇒ P.21 “Paste Shadow Erase—Erasing The Shadow Of Pasted Originals”. ❖ Printing On Thick Or Thin Paper See ⇒ P.22 “Printing On Thick Or Thin Paper”. ❖ Selecting Original Type See ⇒ P.23 “Selecting Original Type”. ❖ Ink Saving See ⇒ P.24 “Economy Mode—Ink Saving”. ❖ Printing From Several Originals At Once See ⇒ P.25 “Auto Cycle—Printing From Several Originals At Once”.
❖ Combining Originals Into One Print See ⇒ P.32 “Combine Copies—Combining 2 Originals Into One Print”. 1 2 1 2 GRCOMB0E ❖ Skip Feed Printing See ⇒ P.35 “Skip Feed Printing”. ❖ Storing Your Print Settings In Memory See ⇒ P.36 “Program—Storing Your Print Settings In Memory”. ❖ Printing Secret Documents See ⇒ P.40 “Security Mode—Printing Secret Documents”. ❖ Making Color Prints See ⇒ P.49 “Making Color Prints”. ❖ Printing In Two Colors See ⇒ P.51 “Printing In Two Colors”.
Guide To Components Machine Exterior 10 2 3 4 5 6 7 1 8 9 TSLH01EE 1. Front Door 5. Feed Roller Pressure Lever Open for access to the inside of the machine. Use to adjust the contact pressure of the paper feed roller according to paper thickness. 2. Operation Panel Operator controls and indicators are located here. See ⇒ P.xii “Operation Panel”. 6. Paper Feed Side Plates 3. Platen Cover 7. Paper Feed Table Lower this cover over an original before printing.
10. Behind Cover Flip up when you use the keys underneath. Machine Interior 1 8 2 3 7 4 TSLH01DE 5 6 1. Document Feeder (Option) 5. Main Switch Original inserted into the document feeder are individually and automatically fed onto and removed from the exposure glass. See ⇒ P.41 “Printing Using The Optional 30 Originals Document Feeder”. Use to turn the power on or off. 2. Paper Delivery Side Plates Lift to unlock and pull out the drum unit. Use to align the prints on the paper delivery table.
Options ❖ 30 Originals Document Feeder TSLP015E Note ❒ Other options: • Color Drum: LG drum • Color Drum: B4 drum • Tape Dispenser • Key Counter xi
Operation Panel Keys 1 6 2 7 1. {Security}} key 4 5 8 15 9 10 11 12 13 14 20 21 6. {Skip Feed}} key Press to make prints of secret documents. See ⇒ P.40 “Security Mode—Printing Secret Documents”. Press to select skip feed printing. See ⇒ P.35 “Skip Feed Printing”. 2. {Paste Shadow Erase}} key Press to erase the shadow of pasted originals. See ⇒ P.21 “Paste Shadow Erase— Erasing The Shadow Of Pasted Originals”. Press to print book originals that have a solid image on the center or edges.
22 23 17 24 18 25 19 26 TSLS021N 13. {Type of Original}} key 20. {W} and {V} keys (Speed keys) Press to select Letter, Photo, or Letter/ Photo mode. See ⇒ P.23 “Selecting Original Type”. Press to adjust the printing speed. See “Print Speed” in ⇒ P.115 “Main Frame”. 14. {Fine}} key Press to select Memory or Class mode. See ⇒ P.27 “Class Mode—Group Printing From The Same Original” or ⇒ P.29 “Memory Mode—Group Printing From Different Originals”. Press to select the fine image. See ⇒ P.
Indicators 1 2 5 1. Error Indicators These indicators are lit when a non-standard condition occurs within the machine. 2. Memory/Class Indicator Shows the number entered in Memory or Class mode. 3. Speed Indicators These indicators show the printing speed that is selected. 4. Counter Displays the number of prints entered. While printing, it shows the number of prints remaining. 5. Guidance Display Display the machine's condition.
TABLE OF CONTENTS 1. OPERATION Printing Paper ............................................................................................ 1 Originals ..................................................................................................... Preparation For Printing ........................................................................... Loading Paper............................................................................................... Setting Up The Paper Delivery Table..............
Program—Storing Your Print Settings In Memory ............................... Storing Your Settings .................................................................................. Recalling A Program ................................................................................... Protecting A Program.................................................................................. Removing Program Protection ....................................................................
x Clearing Misfeeds............................................................................... “x” +“ORIGINAL JAM. REMOVE ORIGINAL” ........................................... “x” + “PAPER FEED JAM. REMOVE JAMMED PAPER” ......................... “x” + “MASTER FEED JAM. REMOVE JAMMED MASTER”.................... “x” + “PAPER WRAP JAM. REMOVE JAMMED PAPER” ........................ “x” + “MASTER EJECT JAM. REMOVE JAMMED MASTER” .................. “x” + “DELIVERY JAM. REMOVE JAMMED PAPER” ...................
This page is intentionally blank.
1. OPERATION Printing Paper The following types of print paper are not recommended for this machine. • Paper smaller than 90 mm × 148 mm, 3.6" × 5.9" • Paper larger than 268 mm × 388 mm, 10.5" ×15.2" • Paper heavier than 157.0 g/m2, 41.7 lb • Paper lighter than 47.1 g/m2, 12.5 lb • Roughly-cut paper • Paper of different thickness in the same stack • Buckled or curled paper • Low stiffness paper Correct curls in the paper before setting it in the machine.
OPERATION Originals Note ❒ Originals that can be set on the exposure glass are as follows: • Maximum size: 257 × 364 mm, 10.2" × 14.4" • Maximum total thickness: 30 mm, 1.1" • Maximum total weight: 5 kg, 11.0 lb ❒ If you use paste-up originals, make sure the pasted parts hold firmly to the base sheet and press the {Paste Shadow Erase} key. If the thickness of the pasteup original is more than 0.1 mm and the space between the pasted parts is less than 2 mm, 0.08", a shadow might appear on the prints.
Preparation For Printing Preparation For Printing C Place the paper on the paper feed Loading Paper 1 table. A Carefully open the paper feed table. TSLY013E TSLH026E B Put the paper feed side plates lock lever. Adjust the side plates to match the paper size. Note ❒ Correct the paper curl before setting the paper. If you cannot do so, stack the paper with the curl face down as shown.
OPERATION D Make sure that the paper feed side plates touch the paper lightly. Put back the lock lever. 1 B Lift the paper delivery side plates and adjust them to the paper size. 2 1 2 1 TSLH030E TSLY015E Setting Up The Paper Delivery Table C Lift the paper delivery end plate and move it to match the print paper size. 2 A Open the paper delivery table. 1 TSLH01ZE D Turn on the main switch. TSLH01YE Reference When the prints are not delivered in a neat stack, see ⇒ P.
Standard Printing Standard Printing should be centered according to the size marks on the right scale. - Printing In this manual, the word, “Printing” is used as opposed to “Copying” in order to distinguish between the process that your machine uses to make prints, and the process used by a standard copier machine. A standard copier scans in the original for each copy set made. This machine, however, scans in your original once and makes multiple prints from this master.
OPERATION E Press the {Proof} } key and check the image density and the image position of the proof print. G Press the {Print}} key. 1 TSLS014N TSLS013N Note ❒ If the image position is not correct, adjust it using the {Image Position} keys or the fine adjustment dial. See ⇒ P.8 “Adjusting The Print Image Position”. ❒ If the image density is slightly dark or light, adjust the image density using the {W} or {V} key. See ⇒ P.10 “Adjusting The Print Image Density”.
Restoring Paper Feed And Paper Delivery Tables Restoring Paper Feed And Paper Delivery Tables A Remove the paper from the paper feed table. 1 D Move the end plate until the plate handle is flush with the end of the table. TSLY016E TSLH021E The paper feed table will lower. B Turn off the main switch. E Lower the end plate. On Off On Off TSLH01VE TSLH01RE C F Move the side plates to the sides, Close the paper feed table. then lower them. 1 2 2 1 TSLH020E TSLH01ME G Close the table.
OPERATION Adjusting The Print Image Position After master making, you can adjust the print image position to suit your needs. There are two ways: 1 ❖ Shifting The Image Position Forward Or Backward Shift the image position using the {Image Position} keys. ❖ Shifting The Image Position To The Right Or Left Shift the image position using the side table fine adjusting dial. Shifting The Print Image Position Forward Or Backward Note ❒ When you shift the image forwards, leave a margin (more than 5 mm, 0.
Adjusting The Print Image Position A Turn the side table fine adjusting dial as shown in the illustrations. C Press the {Proof}} key to check the image position. ❖ Shifting the image to the right 1 TSLS013N TSLH02IE ❖ Shifting the image to the left TSLH02JE Note ❒ The image position can be shifted up to about 10 mm, 0.4" each way. Each division on the scale is 2 mm, 0.08". B Adjust the paper delivery side plates to the print paper position.
OPERATION Adjusting The Print Image Density You can adjust the print image density to suit your needs. There are two ways: 1 key. To reduce the speed, press the {W} key. ❖ Before Making A Master Adjust the image density using the {Image Density} key. ❖ After Making A Master Adjust the image density using the {W} or {V} key. TSLS017N Before Making A Master A Use the {Image Density}} key before pressing the {Start} } key. TSLS016N After Making A Master A Press the {W} or {V} key.
Tint Mode—Making Half-tone Prints Tint Mode—Making Half-tone Prints Note ❒ If the image position is not correct, adjust it using the {Image Position} keys (see ⇒ P.8 “Adjusting The Print Image Position”) or the side table fine adjusting dial (see ⇒ P.8 “Shifting The Print Image Position To The Right Or Left”). GRTINT0E Use the {Tint} key to make half-tone prints. A Press the {Tint}} key to select Tint 1 E Enter the number of prints with the {Number} } keys. F Press the {Print}} key. mode.
OPERATION Fine Mode—Making Clear Prints Use the {Fine} key to make clear prints. 1 A Press the {Fine}} key to select Fine mode. D Enter the number of prints with the {Number} } keys. E Press the {Print}} key. TSLS014N TSLS019N B Set your originals on the exposure glass or in the optional document feeder. C Press the {Start}} key. Check the image position of the trial or proof print. TSLS012N Note ❒ If the image position is not correct, adjust it using the {Image Position} keys (see ⇒ P.
Changing The Printing Speed Changing The Printing Speed Use the {W} or {V} key to adjust the speed of the machine with the image density and printing paper. 1 A Press the {V} key to increase the speed and press the {W} key to reduce the speed. TSLS017N Note ❒ The following speeds are available: • Setting 0: 80 sheets/minute • Setting 1: 100 sheets/minute • Setting 2: 120 sheets/minute ❒ As a default setting, Setting 1 is selected.
OPERATION Stopping The Machine During The Multiprint Run 1 When You Want To Stop The Machine During The Multiprint Run And Print The Next Original When You Want To Change The Number Of Prints Entered Or Check The Completed Prints A Press the {Clear/Stop}} key. A Press the {Clear/Stop}} key. TSLS01AN B Set the new original. C Enter the number of press the {Start} } key. TSLS01AN B Change the number of prints or prints and check the completed prints.
Preset Reduce/Enlarge—Reducing And Enlarging Using Preset Ratios Preset Reduce/Enlarge—Reducing And Enlarging Using Preset Ratios You can select a preset ratio for printing. 1 ❒ Prints can be reduced or enlarged as follows: ❖ Reduction (Metric version) Reduction Ratio GRREDU0E *1 87 % A5 A4 B5 82 % B4 A4 B5 A5 A4 A5 B4 B5 GRENLA0E *1 Select this ratio when you make prints with a lot of edge margins.
OPERATION D Press the {Start}} key. ❖ Enlargement (Metric version) 1 Enlargement Ratio Original Size Print Size 141 % B5 B4 A5 A4 122 % A4 B4 A5 B5 B5 A4 B6 A5 115 % TSLS012N E Check the image position of the ❖ Enlargement (Inch version) trial or proof print.
Center/Edge Erase—Erasing Center And Edge Margins Center/Edge Erase—Erasing Center And Edge Margins When printing from thick books, or similar originals, the binding margin at the center and the edges might appear on prints. To prevent this, follow the steps below. 1 Check Indicator is blinking and is shown in the guidance display.
OPERATION C When you reach the desired paper size and direction, press the {#} } key. or the side table fine adjusting dial (see ⇒ P.8 “Shifting The Print Image Position To The Right Or Left”). G Enter the number of prints with 1 the {Number} } keys. H Press the {Print}} key. TSLS01TN D Set the book on the exposure glass. TSLS014N TSLH014E E Press the {Start}} key. TSLS012N F Check the image position of the trial or proof print.
Edge Erase—Erasing Edge Margins Edge Erase—Erasing Edge Margins If you want to erase edge margins of a book original, follow the steps below. B Press the { } or { } key to select the paper size and direction.
OPERATION E Press the {Start}} key. 1 TSLS012N F Check the image position of the trial or proof print. Note ❒ If the image position is not correct, adjust it using the {Image Position} keys (see ⇒ P.8 “Adjusting The Print Image Position”) or the side table fine adjusting dial (see ⇒ P.8 “Shifting The Print Image Position To The Right Or Left”). G Enter the number of prints with the {Number} } keys. H Press the {Print}} key.
Paste Shadow Erase—Erasing The Shadow Of Pasted Originals Paste Shadow Erase—Erasing The Shadow Of Pasted Originals If you want to erase the shadow of pasted originals, follow the steps below. 1 E Press the {Print}} key. A Set the original on the exposure glass. TSLS014N TSLH010E B Press the {Paste Shadow Erase}} key. TSLS01PN C Press the {Start}} key. TSLS012N D Enter the number of prints with the {Number} } keys.
OPERATION Printing On Thick Or Thin Paper When you make prints on thick (127.9 to 157.0 g/m2, 34.0 to 41.7 lb) or thin (47.1 to 81.4 g/m2, 12.5 to 21.6 lb) paper, perform the following steps. 1 Printing On Thin Paper A Set the side pads (move the side pad levers to as shown). Printing On Thick Paper A When you2 use paper heavier than 127.9 g/m , 34.0 lb and lighter than 157.0 g/m2, 41.7 lb, position pressure lever to the Thick paper position.
Selecting Original Type Selecting Original Type Select one of the following three types to match your originals: B Press the {Image Density} } key to adjust the image density. 1 ❖ Photo mode Delicate tones of photographs and pictures can be reproduced with this mode. ❖ Letter mode Select this mode when your originals contain only letters (no pictures). TSLS016N ❖ Letter/Photo mode Select this mode when your originals contain photographs or pictures with letters.
OPERATION Economy Mode—Ink Saving When you want to save ink, select Economy mode. 1 E Make your prints. Note ❒ Prints will come out lighter. A Press the {Economy}} key. TSLS01FN B Set your originals on the exposure glass or in the optional document feeder. C Press the {Start}} key. TSLS012N D Check the image position of the trial or proof print. Note ❒ If the image position is not correct, adjust it using the {Image Position} keys (see ⇒ P.
Auto Cycle—Printing From Several Originals At Once Auto Cycle—Printing From Several Originals At Once Use the {Auto Cycle} key to process masters and make prints at one stroke. Note ❒ When you use the optional document feeder, it is not necessary to place originals one by one. All originals are fed and prints are completed after you press the {Print} key.
OPERATION F If you use the optional tape dispenser, turn on the tape dispenser power switch. 1 On Off TSLP013E G Press the {Print}} key. Note ❒ Repeat steps A through C until all originals are printed when you set originals on the exposure glass. ❒ If you set originals into the optional document feeder, originals are fed and prints are completed automatically.
Class Mode—Group Printing From The Same Original Class Mode—Group Printing From The Same Original Use the {Memory/Class} key to make sets of prints from the same original. The same number of prints is made for each set. R R R R R R 1 B With the {Number}} keys, enter the number of prints for each set to be made from the original. R GRCLAS0E Note ❒ The optional tape dispenser automatically feeds out strips of paper which separate the printing groups on the paper delivery table.
OPERATION E Turn on the optional tape dispenser power switch. I Make your prints. 1 On Off TSLS014N TSLP013E F Set one original face down on the exposure glass or in the optional document feeder. G Press the {Start}} key. TSLS012N H Check the image position of the trial or proof print. Note ❒ If the image position is not correct, adjust it using the {Image Position} keys (see ⇒ P.8 “Shifting The Print Image Position Forward Or Backward”) or the side table fine adjusting dial (see ⇒ P.
Memory Mode—Group Printing From Different Originals Memory Mode—Group Printing From Different Originals Use the {Memory/Class} key to make sets of prints from different originals. A B C D A B C D 1 B With the {Number}} keys, enter the desired number of prints for the first original. GRCLAS1E Note ❒ With the optional document feeder, you can set several originals and make prints of all of them at once. See ⇒ P.45 “Memory Mode With The Document Feeder”.
OPERATION D With the {Number}} keys, enter the number of prints for the second original. G Set the first original face down on the exposure glass. 1 TSLH010E TSLS011N E Press the {#}} key. This stores the number of prints to be made for the second original in memory 2. Note ❒ Repeat steps D and E for each original. Note ❒ Set originals one sheet at a time in the same order that you stored them in memory. H Press the {Start}} key. ❒ The number of prints for up to 20 originals can be stored.
Memory Mode—Group Printing From Different Originals J Turn on the optional tape dispenser power switch. paper on the top of the paper stack. M After the first set is completed, set the second original on the exposure glass and press the {Start} } key. On 1 Off TSLP013E K Press the {Auto Cycle}} key. TSLS012N Note ❒ Repeat this step until you have finished printing. TSLS01GN Note ❒ If you press the {Auto Cycle} key, you cannot make proof prints by pressing the {Proof} key.
OPERATION Combine Copies—Combining 2 Originals Into One Print 1 As a default, this function cannot be used. If you want to use this function, set “SET COMBINE KEY” to “Yes”. See “SET COMBINE KEY” in ⇒ P.55 “Service Program Menu”. You can print 2 separate originals on a single sheet of paper. The following tables list the combinations that can be used when combining two originals.
Combine Copies—Combining 2 Originals Into One Print mm, 0.16" for the second original) from the leading edge. ❒ You can select different kinds of image settings for the first and second original. ❒ Make sure that the paper feed side plates touch the paper lightly when in the Combine Copies function. Otherwise, the two original images will not appear at the proper position on the prints. Reference When you use the optional document feeder with this function, see ⇒ P.
OPERATION F Press the {Start}} key. J Enter the number of prints with the {Number} } keys. 1 TSLS012N G The beeper sounds after the first original is on the master. Set the second original face down. H Press the {Start}} key. TSLS012N I Check the image position of the trial or proof print. Note ❒ If the image position is not correct, adjust it using the {Image Position} keys (see ⇒ P.8 “Shifting The Print Image Position Forward Or Backward”) or the side table fine adjusting dial (see ⇒ P.
Skip Feed Printing Skip Feed Printing If the backs of prints are dirty, you can increase the time between two prints using the {Skip Feed} key. In the default setting, when one sheet of paper is fed the drum rotates twice. However, you can select the number of rotations of the drum. This gives you the chance to remove prints one by one from the paper delivery table or insert one sheet of paper between two prints. A Set your originals on the exposure glass or in the optional document feeder.
OPERATION Program—Storing Your Print Settings In Memory 1 You can store up to 9 frequently used print job settings in machine memory, and recall them for future use. C Enter “0” with the {Number}} keys. Note ❒ The stored programs are not cleared when you turn off the main switch. ❒ The stored programs cannot be deleted. If you want to change a stored program, overwrite it. TSLS011N D Press the {#}} key. Storing Your Settings A Set the print settings you want to put into memory.
Program—Storing Your Print Settings In Memory E Select the program number you want to store the settings in with the {Number} } keys. Note ❒ Numbers already containing a program are displayed on the guidance display. 1 B Select the program number you want to recall with the {Number} } keys. TSLS011N Note ❒ Make sure that the previous job settings stored under the selected program number are overwritten. F Press the {#}} key. TSLS011N C Press the {#}} key.
OPERATION E Press the {Start}} key. C Press the {#}} key. 1 TSLS012N Protecting A Program If you want to prevent someone from writing over your program, do the following procedure. A While holding down the {Clear/ } key, press the {Program} } Stop} key. TSLS01TN Note ❒ The numbers of the programs which are not protected will be displayed in the guidance display. D Select the program number you want to protect with the {Number} } keys. TSLS011N TSLS01RN B Enter “1” with the {Number}} keys.
Program—Storing Your Print Settings In Memory Removing Program Protection A While holding down the {Clear/ } key, press the {Program} } Stop} key. D Select the program number you want to remove protection from with the {Number} } keys. 1 TSLS011N E Press the {#}} key. TSLS01RN B Enter “0” with the {Number}} keys. TSLS01TN TSLS01MN C Press the {#}} key. TSLS01TN Note ❒ If no program number is protected, the machine returns to the ready condition.
OPERATION Security Mode—Printing Secret Documents 1 This function prevents others from making prints of secret documents from the master. For example, if you want to print some documents with sensitive information, use this function after making your prints so that nobody can access that master again. A Make your prints. B Hold down the {Security}} key for at least 5 seconds.
2. OPTIONAL FUNCTIONS Printing Using The Optional 30 Originals Document Feeder Insert a stack of originals in the document feeder. They will be fed automatically. Document Feeder Exterior 4 3 2 1 TSLP018E 1. Original Tray 3. Original Guides Original used to make masters are delivered to this tray. Adjust these guides to position the originals correctly. 2. ADF Unit 4. ADF Unit Open Lever Feeds the original to the master making position. Use to open the ADF unit.
OPTIONAL FUNCTIONS • • • • • • • • • • • 2 Originals with glue on them Originals perforated for ring binders Book originals Originals written with a pencil or ball-point pen Originals smaller than 148 mm × 105 mm, 5.8" × 4.1" Originals larger than 257 mm × 364 mm, 10.2" × 14.
Printing Using The Optional 30 Originals Document Feeder A Adjust the guide to the original size. 2 TSLH011E B Insert the aligned originals face up in the document feeder until they stop. TSLH012E Limitation ❒ Approximately 30 originals (64 g/m2, 17 lb) can be inserted at one time in the 30 originals document feeder. The first (top) original will be fed first. Note ❒ Do not insert different size originals at the same time. ❒ The guides must fit snugly against both sides of the stack.
OPTIONAL FUNCTIONS Note ❒ If the next original has been set in the document feeder before the machine stops, that original is fed automatically and a trial print is delivered to the paper delivery table after the print of the first original is completed. Check the image position of the trial print of the next original. If necessary, make proof prints using the {Proof} key to check the image position again. 2 Combine Copies With The Document Feeder As a default, this function cannot be used.
Printing Using The Optional 30 Originals Document Feeder D Press the {Start}} key. 2 TSLS012N E Check the image position of the trial or proof print. Note ❒ If the image position is not correct, adjust it using the {Image Position} keys (see ⇒ P.8 “Shifting The Print Image Position Forward Or Backward”) or the side table fine adjusting dial (see ⇒ P.8 “Shifting The Print Image Position To The Right Or Left”). ❒ After the first original is on the master, the second original is fed.
OPTIONAL FUNCTIONS A Press the {Memory/Class}} key to light the Memory indicator. 2 TSLS01WN B With the {Number}} keys, enter the desired number of prints for the first original. TSLS011N C Press the {#}} key. This stores the number of prints to be made for the first original in memory 1. TSLS01TN Note ❒ When the number of prints in each set is the same, it is not necessary to input the number of prints for each group in memory.
Printing Using The Optional 30 Originals Document Feeder D Set your originals face up into the document feeder. 2 TSLH013E Note ❒ When you use the optional 30 originals document feeder, the originals are fed from the bottom of the stack. Make sure that the originals are set in the correct sequence with the first original on the bottom. E Press the {Start}} key. TSLS012N F Check the image position of the trial or proof print.
OPTIONAL FUNCTIONS G Turn on the optional tape dispenser power switch. 2 On Off TSLP013E H Press the {Auto Cycle}} key. TSLS01GN Note ❒ In Auto Cycle mode, printing starts automatically after a trial print is delivered. I Press the {Print}} key. TSLS014N Note ❒ After the last page of each set is fed out to the paper delivery table, the tape dispenser drops a strip of paper on the top of the paper stack. The next cycle begins.
Color Printing Using The Optional Color Drum Color Printing Using The Optional Color Drum Color drum units (red, blue, green, brown, yellow, purple, navy, maroon, orange, teal and gray) are available as options in addition to the standard black unit. For making color prints, a separate drum unit is necessary for each color. P.8 “Shifting The Print Image Position To The Right Or Left”). D Make your prints. 2 Changing The Color Drum Unit A Open the front door.
OPTIONAL FUNCTIONS C Pull out the drum unit handle. Note ❒ Be careful not to let the drum unit fall. F Insert the color drum unit along the guide rail. 2 TSLH01LE Note ❒ If you cannot pull out the drum unit, push the drum unit handle, then pull out the drum unit. D Hold the rail on the drum and slide out the drum while pulling the release towards you. TSLH01PE G Slide in the drum unit until it locks in position. TSLH01HE TSLH01FE E Remove the drum unit from the H Lower the drum unit lock lever.
Color Printing Using The Optional Color Drum I Close the front door. B Press the {Start}} key. Note ❒ Make sure that the Cover Open indicator (M) turns off, and the COLOR is shown in the guidance display. 2 Printing In Two Colors After printing in one color, you can print in another color on the same side of the print. Important ❒ Leave the prints for a while before printing on them again to let the ink dry. ❒ If the prints are not dry, the paper feed roller might become dirty.
OPTIONAL FUNCTIONS E Press the {Print}} key. H Set the second original and press the {Start} } key. 2 TSLS014N F Remove the prints from the paper delivery table and set them on the paper feed table again as shown in the illustration. TSLY019E G Exchange the drum unit. See ⇒ P.49 “Changing The Color Drum Unit”. TSLH01QE 52 TSLS012N I Check the image position. J Press the {Print}} key.
3. SERVICE PROGRAM MODE Accessing Service Programs The service programs can be set by following this procedure. Reference For the service program menu, see ⇒ P.55 “Service Program Menu”. C With the {Number}} keys, enter the desired service program number (SP No.). A Press the {Clear Modes}} key. TSLS011N TSLS01UN B Hold down the {Clear/Stop} } key for at least 3 seconds. Reference For the SP No., see ⇒ P.55 “Service Program Menu”.
SERVICE PROGRAM MODE Changing The Settings Of Service Programs A After entering the desired SP No., press the {#}} key. 3 TSLS01TN The value or mode set at the factory will be displayed at the end of the second line on the guidance display. Note ❒ If you designate the wrong SP No., press the {Clear Modes} key. Then, reenter the desired SP No. B Enter the desired value or mode with the {Number}} keys. TSLS011N C Press the {#}} key to store the desired value or mode.
Changing The Settings Of Service Programs Note ❒ If you enter the wrong value or mode, press the {Clear Modes} key. Then, go back to step A. When you want to leave the service program mode A Press the {Clear Modes} } key. 3 TSLS01UN Service Program Menu SP No. Mode Function 5 Specifies whether the optional tape dispenser can be used. TAPE MARKER OFF Note ❒ Default: 0 ❒ Adjustment value: 0: No 1: Yes 10 MIN PRINT Specifies the minimum number of prints that can be input with the {Number} keys.
SERVICE PROGRAM MODE SP No. Mode Function 12 If you want to change the language used by the guidance display, select the language version. SET DISPLAY Note ❒ Default: 1 ❒ Adjustable value: • 0: Japanese • 1: English • 2: German 3 • 3: French • 4: Italian • 5: Spanish • 6: Chinese • 7: Dutch • 8: Portuguese (BRAZIL) 13 SET SIZE MODE Change the size mode. Note ❒ Default: 0 ❒ Adjustment value: 0: mm 1: Inch 17 SET COMBINE KEY If you want to use Combine Copies mode, select "Yes".
Changing The Settings Of Service Programs SP No. Mode Function 21 The optional key counter usually counts the number of prints made regardless of the number of masters used. For accounting purposes, it is possible for the key counter to be incremented by a value between 0 and 50 whenever a new master is used. PRINTS/MASTER COST Example: The key counter is adjusted to increase by 20 for each master fed. If 100 copies have been made and the master is replaced, the key counter will increase by 120.
SERVICE PROGRAM MODE SP No. Mode Function 41 Specifies the image density at power on. IMAGE DENSITY Note ❒ Default: 1 ❒ Adjustment value: • 0: Light • 1: Standard • 2: Dark 3 • 3: Darker 42 PRINT SPEED Specifies the printing speed at power on. Note ❒ Default: 1 ❒ Adjustment value: • 0 : 80 sheets/minute • 1 : 100 sheets/minute • 2 : 120 sheets/minute 43 AUTO CYCLE MODE Specifies whether Auto Cycle mode is selected at power on.
Changing The Settings Of Service Programs SP No. Mode Function 84 If you set an original on the exposure glass and press the {Combine Copies} key and {Start} key, two identical images are printed on the one sheet. AUTO MULTI COPY Note ❒ Default: 0 ❒ Adjustment value: 0: No 1: Yes ❒ For details about Combine Copies, see ⇒ P.32 “Combine Copies—Combining 2 Originals Into One Print”.
SERVICE PROGRAM MODE SP No. Mode Function 114 Clears the resettable master/print counter. CLR RESETTABLE COUNT Note ❒ Default: 0 ❒ Adjustment value: 0: No 1: Yes 120 USER CODE MODE 3 Selects user code mode. When you set this function, you have to also specify the auto reset time. For details about user code mode, see ⇒ P.62 “User Codes”.
Changing The Settings Of Service Programs SP No. Mode Function 160 Adjust the default side edge margin width in Edge Erase and Center/Edge Erase mode. SIDE ERS. Note ❒ Default: • Metric Version: 5 mm • Inch Version: 0.2" ❒ Adjustable value: • Metric Version: 2 – 20 mm 3 • Inch Version: 0.1" – 0.8" 161 CENTER ERS. Adjust the default center margin width in Center/ Edge Erase mode. Note ❒ Default: • Metric version: 10 mm • Inch version: 0.
SERVICE PROGRAM MODE User Codes If the machine is set to use the User Code function, operators must input their user codes before the machine can operate. The machine keeps count of the number of prints made under each user code. In this mode, the following 20 user codes (fixed) can be used to access the machine: 382, 191, 182, 173, 164, 155, 146, 137, 128, 119, 482, 291, 282, 273, 264, 255, 246, 237, 228, 219 3 B Hold down the {Clear/Stop} } key for at least 3 seconds.
User Codes C After you have finished, press the key. {Clear/Stop} } key while holding down the {Clear Modes} } key. TSLS011N 3 F Press the {Clear Modes} } key to leave Service Program mode. TSLS01SN Note ❒ This prevents others from making prints using your user code. ❒ If you do not follow this step, the machine will not request the next user for their codes unless the auto reset time has expired.
SERVICE PROGRAM MODE E Press for at least 3 seconds. the {Clear Modes} } key to leave Service Program mode. TSLS01AN 3 C Enter TSLS01UN “121” with the {Number} } keys and press the {#} } key. How To Clear The User Code Counter (# 122) Reference If you want to clear every user code counter, see ⇒ P.66 “How To Clear The User Code Total Counter (# 124)”. TSLS011N The number of masters and prints made under the user code “382” will be displayed in the guidance display. A Press the {Clear Modes}} key.
User Codes B Hold down the {Clear/Stop} } key for at least 3 seconds. E Enter “1” (Yes) with the {Number}} keys and press the {#} } key. TSLS01AN C Enter “122” with the {Number} } keys and press the {#} } key. 3 TSLS01VN F Press the {Clear Modes} } key to leave Service Program mode. How To Check The Total Number Of Masters And Prints Made Under All User Codes (# 123) TSLS011N A Press the {Clear Modes}} key. D Keep pressing the {#}} key until desired user code is displayed.
SERVICE PROGRAM MODE C Enter “123” with the {Number} } keys and press the {#} } key. How To Clear The User Code Total Counter (# 124) A Press the {Clear Modes}} key. 3 TSLS011N The total number of masters and prints made under all user codes will be displayed in the guidance display. • M: Number of masters • P: Number of prints TSLS01UN B Hold down the {Clear/Stop} } key for at least 3 seconds. D Press the {Clear Modes} } key to leave Service Program mode.
User Codes D Enter “1” (Yes) with the {Number}} keys and press the {#} } key. 3 TSLS01VN E Press the {Clear Modes} } key to leave Service Program mode.
SERVICE PROGRAM MODE 3 This page is intentionally blank.
4. REPLENISHING SUPPLIES Loading Paper On The Paper Feed Table The Load Paper indicator (B) blinks when the paper feed table runs out of paper. B Press the {Paper Feed Table Down}} key. Replenishing Paper A Press the {Clear/Stop}} key. TSLS01AN TSLH029E Note ❒ This step is necessary only if you want to pause a print run to replenish paper. Note ❒ The paper feed table will lower without the key being pressed when the printing paper runs out. ❒ The top sheet might remain between the feed rollers.
REPLENISHING SUPPLIES Note ❒ Correct paper curl before setting the paper. 1 D Press the {Print} } key to resume printing. TSLH01AE 1: Paper Feed Side Plates Lock Lever 4 TSLS014N C Place the paper on the paper feed table. Changing The Paper Size A Remove the paper from the paper feed table. TSLY013E TSLY016E The paper feed tray will lower. B Put the paper feed side plates lock lever. Adjust the paper feed side plates to match the paper size.
When The Add Ink Indicator (j) Blinks When The Add Ink Indicator (j) Blinks The Add Ink indicator (j) blinks when it is time to supply ink. R CAUTION: • If ink comes into contact with your eyes, rinse immediately in run- ning water. In the case of any abnormal symptoms, consult a doctor. R CAUTION: • Keep the ink or ink container out of reach of children. 4 R CAUTION: • If ink is ingested, force vomiting by drinking a strong saline solu- tion and consult a doctor immediately.
REPLENISHING SUPPLIES B Pull out the ink holder and remove the used ink cartridge. 2 1 TSLH01JE C Remove the cap of the new ink cartridge. 4 TSLT012E D Insert the new cartridge into the ink holder. 1 2 TSLT013E E Return the ink holder to its original position until it clicks. Note ❒ Always supply ink of the same color.
When The Add Ink Indicator (j) Blinks ❒ Make sure to firmly insert the part indicated by the arrow mark into the guide. TSLT011E F Close the front door. 4 The machine will start idling to supply ink to the drum. Note ❒ It will stop when the correct amount of ink reaches the drum.
REPLENISHING SUPPLIES Master Roll Replacement The Master End indicator (C) is lit when it is time to replace the master roll. A D Open the original table. Remove the used master roll and pull out both spools. Then, insert both spools into a new master roll. 4 TSLT010E TSLH01SE Note ❒ When the Master End indicator lights, it is necessary to replace the master roll even if some master remains on the old roll. Note ❒ Lift the original table release lever and lift the original table.
Master Roll Replacement F Set the paper edge of the master roll as shown. TSLH01UE I Return the original table to its original position. TSLH025E Note ❒ Rotate the spools backward to take up any slack in the master. 4 G Close the plotter cover. TSLH023E H Close the right side cover.
REPLENISHING SUPPLIES Placing A New Roll Of Tape In The Tape Dispenser (Option) Note ❒ Make sure that the main switch is turned on and the power switch of the tape dispenser is off. A Open the C Feed the leading edge of the roll in the dispensing slot until it stops. cover of the tape dis- penser. 4 TSLP012E TSLP010E B As shown, put the roll in the dispenser. Note ❒ Push the tape as far as possible through the slot. D Turn on the power switch of the tape dispenser.
Placing A New Roll Of Tape In The Tape Dispenser (Option) E Press the manual cut button to trim off the leading edge of the tape.
REPLENISHING SUPPLIES 4 This page is intentionally blank.
5. WHAT TO DO IF SOMETHING GOES WRONG If Your Machine Does Not Operate As You Want If a malfunction or a misfeed occurs within the machine, the following indicators will blink or light. TSLS020N ❖ When the misfeed indicator (x x) blinks Indicator Guidance Display Page x ⇒ P.82 ““x” +“ORIGINAL JAM. REMOVE ORIGINAL”” ORIGINAL JAM. REMOVE ORIGINAL REMOVE ORIGINAL x PAPER FEED JAM. REMOVE JAMMED PAPER x MASTER FEED JAM. REMOVE JAMMED MASTER ⇒ P.85 ““x” + “PAPER FEED JAM.
WHAT TO DO IF SOMETHING GOES WRONG R CAUTION: • Be careful not to cut yourself on any sharp edges when you reach inside the machine to remove misfed sheets of paper or masters. Note ❒ To prevent misfeeds, do not leave any torn scraps of paper within the machine. ❒ When clearing misfeeds, do not turn off the main switch. If you do, your copy settings are cleared. ❒ If misfeeds occur repeatedly, contact your service representative.
If Your Machine Does Not Operate As You Want ❖ When one of the following messages is displayed on the guidance display Guidance Display Meaning RE-ENTER COPY NUMBER MAXIMUM IS XXX The maximum number of prints that can be entered is specified by the Service Program mode. Change the number of prints. RE-ENTER COPY NUMBER MINIMUM IS XXX The minimum number of prints that can be entered is specified by the Service Program mode. Change the number of prints.
WHAT TO DO IF SOMETHING GOES WRONG x Clearing Misfeeds Important ❒ When clearing misfeeds, do not turn off main switch. If you do, your print settings are cleared. - After clearing misfeeds Press the {Clear Modes} key to reset the error indicators. 5 TSLS01UN x” +“ORIGINAL JAM. REMOVE ORIGINAL” “x Note ❒ These indicators will blink when your machine is equipped with the optional document feeder. A Press the ADF unit open lever and open the ADF unit.
x Clearing Misfeeds B Pull out the original gently. TSLY011E C If you cannot remove the misfed original, pull out the original from the side of the original tray and remove the original. 5 TSLY017E D If you still cannot remove the misfed paper, press the ADF open lever and open the ADF unit to remove the original. TSLY014E E Close the ADF unit until it locks in position. - To prevent original misfeeds: • Originals heavier than 90 g/m2, 23.
WHAT TO DO IF SOMETHING GOES WRONG • • • • • • • • • • • • • • 5 Originals lighter than 40 g/m2, 10.6 lb (when setting one original at a time) Carbon coated originals Damaged originals Originals with glue on them Originals perforated for ring binders Book originals Originals written with a pencil or ball-point pen Originals smaller than 148 mm × 105 mm, 5.8" × 4.1" Originals larger than 257 mm × 364 mm, 10.2" × 14.
x Clearing Misfeeds x” + “PAPER FEED JAM. REMOVE JAMMED PAPER” “x R CAUTION: • Be careful not to cut yourself on any sharp edges when you reach inside the machine to remove misfed sheets of paper or masters. Misfeed in the paper feed section A Slowly but firmly pull out the paper. 5 TSLY010E Paper is wrapped around the drum A Pull out the drum unit. TSLH01QE B Remove the misfed paper.
WHAT TO DO IF SOMETHING GOES WRONG C Re-insert the drum unit until the drum unit locks in position and put the lever back in place. TSLH028E D Close the front door. - To prevent paper misfeeds: 5 If the paper is curled or the originals leading edge margin is too narrow, the following action is necessary. • When you use curled paper, correct the curl as shown.
x Clearing Misfeeds • If you cannot correct the paper curl, stack the paper with the curl face down as shown. GRMARU0E GRBATS0E • When the leading edge margin of the original is less than 5 mm, 0.2" or there is a solid image on the leading edge, insert the original with the widest margin first or make a leading edge margin by making a copy.
WHAT TO DO IF SOMETHING GOES WRONG “x x” + “MASTER FEED JAM. REMOVE JAMMED MASTER” A Open the original table. TSLH01SE Note ❒ Lift the original table release lever and slide the original table all the way to the left. 5 B Open the right side cover. TSLH01TE C Open the plotter cover.
x Clearing Misfeeds D If you could not remove the misfed master in steps B and C, take out the drum and remove the misfed master from the inside. TSLH01BE Reference For how to take out the drum unit, see ⇒ P.49 “Changing The Color Drum Unit”. E If the original misfeeds in the optional document feeder, press the ADF 5 open lever and open the ADF unit to remove the misfed sheet. TSLY014E F Return the original table to its original position.
WHAT TO DO IF SOMETHING GOES WRONG A Remove the misfed paper. TSLH02FE B If the paper is completely wrapped around the drum, pull out the drum unit and remove the misfed paper from the drum. 5 2 1 TSLH02AE C Re-install the drum unit locks in position and put the lever back in place. TSLH028E Note ❒ If you followed step B or C, close the front door. - To prevent paper misfeeds: If the paper is curled or the original's leading edge margin is too narrow, the following action is necessary.
x Clearing Misfeeds • When you use curled paper, correct the curl as shown. GRCURL0E • If you cannot correct the paper curl, stack the paper with the curl face down as shown. 5 GRMARU0E GRBATS0E • When the leading edge margin of the original is less than 5 mm, 0.2" or there is a solid image on the leading edge, insert the original with the widest margin first or make a leading edge margin by making a copy.
WHAT TO DO IF SOMETHING GOES WRONG “x x” + “MASTER EJECT JAM. REMOVE JAMMED MASTER” A Check where the misfed master is. Remove the misfed master as follows. When a master misfeed occurs in the master eject section A Pull out the master eject box. 5 TSLH022E B Remove the misfed master. TSLY018E Note ❒ Be careful not to stain your hands with ink when you touch used masters. C Return the master eject box to its original position.
x Clearing Misfeeds When a master misfeed occurs on the drum A Lift the lever to unlock the drum unit and pull out the unit. TSLH01QE Reference For how to remove the drum unit, see ⇒ P.49 “Changing The Color Drum Unit”. 5 B Grasp the drum unit handle and remove the master from the drum. TSLH02BE C Pull the master out of the master clamp.
WHAT TO DO IF SOMETHING GOES WRONG D Re-insert the drum unit until the drum unit locks in position and put the lever back in place. TSLH028E “x x” + “DELIVERY JAM. REMOVE JAMMED PAPER” A Remove the misfed paper. 5 TSLH02FE Note ❒ Make sure that the paper delivery end plate and paper delivery side plates are in the proper position.
When The Open Cover/Unit Indicator (M) Blinks When The Open Cover/Unit Indicator (M) Blinks MMake sure that the following door/units are closed. ❖ Original Table Close the original table until it locks in position. 5 TSLH025E ❖ Front Door Close the front door completely. TSLH024E ❖ ADF Unit (Option) Close the ADF unit until it locks in position.
WHAT TO DO IF SOMETHING GOES WRONG Make sure that the drum is completely set in position. • Set the drum unit completely until it locks in position.
When The Master Eject Indicator (k) Blinks When The Master Eject Indicator (k) Blinks The Master Eject indicator (k) and the Reset indicator blink when it is time to empty master eject box or when you need to set the master eject box. A Take out the master eject box and remove the used masters. 5 TSLH022E Note ❒ Spread an old newspaper, then turn the master eject box upside down on it to remove the used masters. Then, throw away the masters. B Re-install the master eject box.
WHAT TO DO IF SOMETHING GOES WRONG When Other Indicators Blink u The key counter (option) is not set. Insert the key counter.
When The Prints Are Thrown Over The Paper Delivery Table When The Prints Are Thrown Over The Paper Delivery Table A Reduce the printing speed by pressing the {W} key.
WHAT TO DO IF SOMETHING GOES WRONG Poor Printing Dirt On The Back Side Of Paper GRDIRT0E Note ❒ When you use paper smaller than the original, select the proper reduction ratio. Otherwise, you might get dirty background prints. ❒ When you use postcards and the like, the background might be dirty because postcards do not absorb ink well. ❒ You might get prints with dirty background when printing at high speed and under high temperature. 5 A Turn off the main switch.
Poor Printing Reference See ⇒ P.49 “Changing The Color Drum Unit” for the details. C Clean the pressure roller with a clean cloth. TSLH01NE D With a clean cloth, remove any ink that has accumulated on the trailing edge of the drum unit. 5 TSLH02CE E Insert the drum unit until it locks in position, then lower the drum unit lock lever. TSLH028E F Close the front door.
WHAT TO DO IF SOMETHING GOES WRONG G Turn on the main switch. On Off On Off TSLH01RE Dirt On The Front Side Of Paper (Black Line/Stain) 5 GRBLAC1E Note ❒ When black lines or stains still appear on prints even if you clean the above, contact your service representative. ❒ If there is no margin or if there is a solid image area near the leading edge of the original, make a margin of at least 5 mm, 0.2" at the leading edge.
Poor Printing • Make sure that the paper feed side plates touch the paper lightly. Put back the lock lever. TSLY015E • When you use the optional document feeder, make sure that the original guides contact the originals lightly. When you get white or incomplete prints even if you check the items above, perform the following procedure. A Pull out the drum unit. 5 TSLH01GE Reference See ⇒ P.49 “Changing The Color Drum Unit” for the details. B Remove the master from the drum.
WHAT TO DO IF SOMETHING GOES WRONG C Remove paper that is stuck to the drum. 2 1 TSLH031E D Insert the drum unit until it locks in position, then lower the drum unit lock lever. 5 TSLH028E E Close the front door.
