Operating instructions

Sub Transmission Mode
65
4
F Specify the transmission mode from
[2 Sided from 1st Page] or [1 Sided for
1st Page], and then press [OK].
The selected original position and
page opening orientation are shown
above the highlighted [2 Sided Orig-
inal].
Note
❒ To cancel this mode, press [Can-
cel]. The display returns to that
of step
C
.
❒ Select [2 Sided from 1st Page] to
send a two-sided original from
the first page.
❒ Select [1 Sided for 1st Page] if you
want to send a cover letter as the
first page.
G Press [OK].
H Specify the destination, and then
press the {Start} key.
Standard Message Stamp
Use this function to stamp a standard
message at the top of the first original
sent.
There are four types of standard mes-
sages: “Confidential”, “Urgent”,
“Please phone.”, and “Copy to corres.
section”
You can also program other messages.
Note
❒ While this function is in use, the
third line of the Label Insertion is
not printed. See p.74 “Label Inser-
tion”.
❒ When there is an image around the
area where the standard message
is to be stamped, that image is de-
leted.
❒ To program a standard message, use
the Program / Change / Delete
Standard Message function. See
p.157 “Programming, Changing,
and Deleting Standard Messages”.
A Place the originals, and then select
the scan settings you require.
Reference
p.11 “Placing Originals”, Fac-
simile Reference <Basic Features>
p.30 “Scan Settings”, Facsimile
Reference <Basic Features>
B Press [Sub TX Mode].
C Press [Std. Message].
AdonisC4-AE_Combine-F_FM.book Page 65 Thursday, May 12, 2005 3:15 PM