Operating instructions

Resending a File
25
2
Resending a File
Machine memory stores documents
that could not be successfully trans-
mitted using Memory Transmission.
Use this procedure to resend these
documents.
Preparation
Set “Store documents in memory
that could not be transmitted” to
“On” in User Parameters. See p.167
“User Parameters” (switch 24, bit
0).
Note
❒ Files that could not be transmitted
are kept for either 24 or 72 hours
depending on how you program
this function. See p.167 “User Pa-
rameters” (switch 24, bit 1).
A Press [Change / Stop TX File].
B Press [Transmit Failed File].
C Select the file you want to resend.
“TX failed” is displayed for files
that could not be sent.
Note
❒ If multiple destinations were spec-
ified, only the destination you
specify first appears.
❒ If multiple destinations were spec-
ified, only the number of destina-
tions for unsent documents appears.
❒ To add a destination, press [Add],
and then specify the destination.
D Press [OK].
Note
❒ To cancel transmissions, press [Can-
cel]. The display returns to that
of step
C
.
❒ Repeat from step
C
to resend an-
other file.
E Press [Exit].
The standby display appears.
Transmission starts.
AdonisC4-AE_Combine-F_FM.book Page 25 Thursday, May 12, 2005 3:15 PM