Operating instructions

Transmission Mode
14
1
Polling Reception
Use this function to poll a document
from another machine. You can also
poll documents from many machines
with only one operation (use Groups
and Keystroke Programs to fully ex-
ploit this function).
There are two types of Polling Recep-
tion.
Default ID/Free Polling Reception
Use this method for Free Polling or
Default ID Polling. If the Polling ID
is programmed in your machine,
any document waiting in the trans-
mitting machine with the same ID
are received. If the other machine
does not have any documents waiting
with the same Polling ID, any doc-
uments that do not require ID are
received (Free Polling).
ID Override Polling Reception
You must enter an Override Polling ID
unique to this transmission. This ID
overrides the one stored in this machine.
Your machine will receive any doc-
uments waiting in the transmitting
machine that have matching ID's.
If no ID's match, any documents
that do not require IDs are received
(Free Polling).
Limitation
Polling Reception requires that the
other machine is capable of Polling
Transmission.
Usually, you can only receive doc-
uments with a Polling ID from ma-
chines of the same manufacturer
that support the polling function.
However, if the other party's fax
machine supports Polling Trans-
missions and the SEP function, and
also has stored IDs, you can still
perform Polling Reception. See
p.50 “SEP Code”.
This function is not available with
Internet Fax.
Note
To receive a document sent by De-
fault ID Polling Transmission or ID
Override Polling Transmission, it
is necessary to specify the same
Polling ID as the sender's. Free
Polling Transmission does not re-
quire the same Polling ID.
Polling Result Report allows you
to verify Polling Reception has tak-
en place. See p.16 “Polling Recep-
tion Result Report”.
You can program one of the Quick
Operation keys with operations for
this function. Using the key allows
you to omit step A. See p.145 “Gen-
eral Settings/Adjustment”.
AdonisC4-AE_Combine-F_FM.book Page 14 Thursday, May 12, 2005 3:15 PM